DDR V1.12 52218f4949 cym 23/07/06-19:46:50 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB Manufacturer ID:0x6 CH0 RX Vref:30.6%, TX Vref:21.8%,20.8% CH1 RX Vref:30.5%, TX Vref:20.8%,19.8% CH2 RX Vref:31.4%, TX Vref:20.8%,19.8% CH3 RX Vref:31.0%, TX Vref:20.8%,20.8% change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz change to F0: 2112MHz out U-Boot SPL board init U-Boot SPL 2017.09-g5f53abfa1e-221223 #zzz (Dec 26 2022 - 09:10:09) Trying to boot from MMC2 MMC: no card present mmc_init: -123, time 0 spl: mmc init failed with error: -123 Trying to boot from MMC1 Card did not respond to voltage select! mmc_init: -95, time 14 spl: mmc init failed with error: -95 Trying to boot from MTD2 No misc partition Trying fit image at 0x800 sector ## Verified-boot: 0 ## Checking atf-1 0x00040000 ... sha256(b40ce543bb...) + OK ## Checking uboot 0x00200000 ... sha256(6bfe01f0f2...) + OK ## Checking fdt 0x00700000 ... sha256(c07f4a4d71...) + OK ## Checking atf-2 0x000f0000 ... sha256(f202de33d9...) + OK ## Checking atf-3 0xff100000 ... sha256(af08976afd...) + OK ## Checking optee 0x08400000 ... sha256(6193f4aac7...) + OK ## Checking nvdata 0x007c0000 ... OK Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000) Total: 632.817 ms INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-616-gdc1125f48:finley.xiao NOTICE: BL31: Built : 16:41:17, Jul 13 2023 INFO: spec: 0x1 INFO: ext 32k is valid INFO: ddr: stride-en 4CH INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0 INFO: system boots from cpu-hwid-0 INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001 INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz INFO: BL31: Initialising Exception Handling Framework INFO: BL31: Initializing runtime services INFO: BL31: Initializing BL32 I/TC: I/TC: OP-TEE version: 3.13.0-698-g7f1ea6d6e #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #53 Wed Apr 19 14:30:22 CST 2023 aarch64 I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 UEFI firmware (version v0.9.1 built at 00:17:55 on Oct 12 2023) >>Start PXE over IPv4. Station IP address is 172.18.129.25 Server IP address is 172.18.129.15 NBP filename is bootaa64.efi NBP filesize is 196056 Bytes Downloading NBP file... NBP file downloaded successfully. boot: client ip: 172.18.129.25 boot: server ip: 172.18.129.15 boot: file name: bootaa64.efi \\-__,------,___. \\ __,---` NetBSD/evbarm efiboot (arm64) \\ `---,_. Revision 2.13 (Mon Oct 2 08:52:05 UTC 2023) \\-,_____,.---` \\ \\ \\ 1. Netboot in fdt mode w/ custom dtb 2. Netboot in ACPI mode 3. prompt Option: [1]:1 boot: loading rk3588-orangepi-5-plus.dtb done. NetBSD/evbarm (fdt) booting ... I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot I/TC: Secondary CPU 6 initializing I/TC: Secondary CPU 6 switching to normal world boot I/TC: Secondary CPU 7 initializing I/TC: Secondary CPU 7 switching to normal world boot Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 10.99.10 (GENERIC.opi5) #0: Mon Oct 16 19:52:52 CEST 2023 tnn@lx2k.rymdfartsverket.se:/work/obj/sys/arch/evbarm/compile/GENERIC.opi5 total memory = 16074 MB avail memory = 15495 MB armfdt0 (root) armfdt0: using EFI runtime services for RTC simplebus0 at armfdt0: Xunlong Orange Pi 5 Plus cpus0 at simplebus0 psci0 at simplebus0: PSCI 1.1 simplebus1 at simplebus0 cpu0 at cpus0: Arm Cortex-A55 r2p0 (v8.2-A+), id 0x0 cpu0: package 0, core 0, smt 0 cpu1 at cpus0: Arm Cortex-A55 r2p0 (v8.2-A+), id 0x100 cpu1: package 0, core 1, smt 0 cpu2 at cpus0: Arm Cortex-A55 r2p0 (v8.2-A+), id 0x200 cpu2: package 0, core 2, smt 0 cpu3 at cpus0: Arm Cortex-A55 r2p0 (v8.2-A+), id 0x300 cpu3: package 0, core 3, smt 0 cpu4 at cpus0: Arm Cortex-A76 r4p0 (v8.2-A+), id 0x400 cpu4: package 0, core 4, smt 0 cpu5 at cpus0: Arm Cortex-A76 r4p0 (v8.2-A+), id 0x500 cpu5: package 0, core 5, smt 0 cpu6 at cpus0: Arm Cortex-A76 r4p0 (v8.2-A+), id 0x600 cpu6: package 0, core 6, smt 0 cpu7 at cpus0: Arm Cortex-A76 r4p0 (v8.2-A+), id 0x700 cpu7: package 0, core 7, smt 0 gicvthree0 at simplebus0: GICv3 gicvthree0: MBI frame @ 0xfe610000, SPIs 424-479 syscon0 at simplebus0: System Controller Registers syscon1 at simplebus0: System Controller Registers syscon2 at simplebus0: System Controller Registers syscon3 at simplebus0: System Controller Registers syscon4 at simplebus0: System Controller Registers syscon5 at simplebus0: System Controller Registers syscon6 at simplebus0: System Controller Registers syscon7 at simplebus0: System Controller Registers syscon8 at simplebus0: System Controller Registers syscon9 at simplebus0: System Controller Registers syscon10 at simplebus0: System Controller Registers syscon11 at simplebus0: System Controller Registers syscon12 at simplebus0: System Controller Registers syscon13 at simplebus0: System Controller Registers syscon14 at simplebus0: System Controller Registers syscon15 at simplebus0: System Controller Registers syscon16 at simplebus0: System Controller Registers syscon17 at simplebus0: System Controller Registers syscon18 at simplebus0: System Controller Registers syscon19 at simplebus0: System Controller Registers syscon20 at simplebus0: System Controller Registers syscon21 at simplebus0: System Controller Registers syscon22 at simplebus0: System Controller Registers syscon23 at simplebus0: System Controller Registers syscon24 at simplebus0: System Controller Registers syscon25 at simplebus0: System Controller Registers syscon26 at simplebus0: System Controller Registers syscon27 at simplebus0: System Controller Registers syscon28 at simplebus0: System Controller Registers syscon29 at simplebus0: System Controller Registers syscon30 at simplebus0: System Controller Registers syscon31 at simplebus0: System Controller Registers syscon32 at simplebus0: System Controller Registers syscon33 at simplebus0: System Controller Registers syscon34 at simplebus0: System Controller Registers syscon35 at simplebus0: System Controller Registers syscon36 at simplebus0: System Controller Registers syscon37 at simplebus0: System Controller Registers syscon38 at simplebus0: System Controller Registers syscon39 at simplebus0: System Controller Registers syscon40 at simplebus0: System Controller Registers syscon41 at simplebus0: System Controller Registers syscon42 at simplebus0: System Controller Registers syscon43 at simplebus0: System Controller Registers syscon44 at simplebus0: System Controller Registers syscon45 at simplebus0: System Controller Registers syscon46 at simplebus0: System Controller Registers syscon47 at simplebus0: System Controller Registers syscon48 at simplebus0: System Controller Registers syscon49 at simplebus0: System Controller Registers syscon50 at simplebus0: System Controller Registers syscon51 at simplebus0: System Controller Registers syscon52 at simplebus0: System Controller Registers syscon53 at simplebus0: System Controller Registers syscon54 at simplebus0: System Controller Registers syscon55 at simplebus0: System Controller Registers syscon56 at simplebus0: System Controller Registers fclock0 at simplebus0: 702000000 Hz fixed clock (spll) fclock1 at simplebus0: 24000000 Hz fixed clock (xin24m) fclock2 at simplebus0: 32768 Hz fixed clock (xin32k) syscon57 at simplebus0: System Controller Registers rkcru0 at simplebus0XXXTNN skip reprogramming clock 3 clk: failed to set clk_uart7 rate to 400000000 Hz, error 22 XXXTNN skip reprogramming clock 12 : RK3588 CRU gtmr0 at simplebus0: Generic Timer gtmr0: interrupting on GICv3 irq 27 armgtmr0 at gtmr0: Generic Timer (24000 kHz, virtual) rkiomux0 at simplebus0: RK3588 IOMUX control rkgpio0 at rkiomux0: GPIO (gpio@fd8a0000) gpio0 at rkgpio0: 32 pins rkgpio1 at rkiomux0: GPIO (gpio@fec20000) gpio1 at rkgpio1: 32 pins rkgpio2 at rkiomux0: GPIO (gpio@fec30000) gpio2 at rkgpio2: 32 pins rkgpio3 at rkiomux0: GPIO (gpio@fec40000) gpio3 at rkgpio3: 32 pins rkgpio4 at rkiomux0: GPIO (gpio@fec50000) gpio4 at rkgpio4: 32 pins rkiic0 at simplebus0: Rockchip I2C (100000 Hz) iic0 at rkiic0: I2C bus regulator (rockchip,rk8602) at iic0 addr 0x42 not configured regulator (rockchip,rk8603) at iic0 addr 0x43 not configured fregulator0 at simplebus0: vcc5v0_usb20 fregulator1 at simplebus0: vcc5v0_sys fregulator2 at simplebus0: vcc3v3_pcie_eth fregulator3 at simplebus0: vcc3v3_pcie30 fregulator4 at simplebus0: vcc3v3_wf rkiic1 at simplebus0: Rockchip I2C (100000 Hz) iic1 at rkiic1: I2C bus audio-codec (everest,es8388) at iic1 addr 0x11 not configured com0 at simplebus0: DesignWare APB UART, 64-byte FIFO com0: console com0: interrupting on GICv3 irq 365 com1 at simplebus0: DesignWare APB UART, 64-byte FIFO com1: interrupting on GICv3 irq 372 rkiic2 at simplebus0: Rockchip I2C (400000 Hz) iic2 at rkiic2: I2C bus rtc (haoyu,hym8563) at iic2 addr 0x51 not configured rkspi0 at simplebus0: SPI rkspi0: interrupting on GICv3 irq 360 spi0 at rkspi0: SPI bus slave 0 not configured /sram@10f000 at simplebus0 not configured /syscon@fd5d8000/usb2-phy@8000 at syscon0 not configured /power-management@fd8d8000/power-controller at syscon1 not configured /syscon@fd5dc000/usb2-phy@c000 at syscon2 not configured /dma-controller@fea10000 at simplebus0 not configured /dma-controller@fed10000 at simplebus0 not configured /pcie@fe180000 at simplebus0 not configured /phy@fee20000 at simplebus0 not configured /pcie@fe190000 at simplebus0 not configured /phy@fee00000 at simplebus0 not configured /dma-controller@fea30000 at simplebus0 not configured /pcie@fe150000 at simplebus0 not configured /phy@fee80000 at simplebus0 not configured /pcie@fe170000 at simplebus0 not configured /phy@fee10000 at simplebus0 not configured /adc@fec10000 at simplebus0 not configured /pwm@fd8b0030 at simplebus0 not configured /pwm@fd8b0020 at simplebus0 not configured simpleamp0 at simplebus0: Simple Amplifier simpleamp1 at simplebus0: Simple Amplifier ausoc0 at simplebus0: Analog /i2s@fe470000 at simplebus0 not configured /pmu-a55 at simplebus0 not configured /pmu-a76 at simplebus0 not configured ehci0 at simplebus0: EHCI ehci0: interrupting on GICv3 irq 247 ehci0: 1 companion controller, 1 port ehci0: Using DMA subregion for control data structures usb0 at ehci0: USB revision 2.0 ohci0 at simplebus0: OHCI ohci0: interrupting on GICv3 irq 248 ohci0: OHCI version 1.0 usb1 at ohci0: USB revision 1.0 ehci1 at simplebus0: EHCI ehci1: interrupting on GICv3 irq 250 ehci1: 1 companion controller, 1 port ehci1: Using DMA subregion for control data structures usb2 at ehci1: USB revision 2.0 ohci1 at simplebus0: OHCI ohci1: interrupting on GICv3 irq 251 ohci1: OHCI version 1.0 usb3 at ohci1: USB revision 1.0 /sram@fd600000 at simplebus0 not configured /spi@fe2b0000 at simplebus0 not configured dwcmmc0 at simplebus0: couldn't get clock biu /mmc@fe2e0000 at simplebus0 not configured rki2s0 at simplebus0: I2S/PCM controller rki2s0: interrupting on GICv3 irq 214 /timer@feae0000 at simplebus0 not configured dwcwdt0 at simplebus0: DesignWare Watchdog Timer dwcwdt0: default watchdog period is 15 seconds /tsadc@fec00000 at simplebus0 not configured /efuse@fecc0000 at simplebus0 not configured /sram@ff001000 at simplebus0 not configured /adc-keys-0 at simplebus0 not configured /adc-keys-1 at simplebus0 not configured /ir-receiver at simplebus0 not configured gpioleds0 at simplebus0: led pwmfan0 at simplebus0: couldn't acquire pwm /pwm-leds at simplebus0 not configured genfb0 at simplebus1: Simple Framebuffer (1920x1080 32-bpp @ 0xe9ce0000) wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation) ausoc0: couldn't acquire cpu dai on sound node WARNING: system needs entropy for security; see entropy(7) uhub0 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 uhub1 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 uhub2 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 uhub3 at usb3: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 umass0 at uhub2 port 1 configuration 1 interface 0 umass0: Asmedia (0x174c) ASMT105 (0x55aa), rev 2.10/1.00, addr 2 scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: disk fixed sd0: 223 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 468862128 sectors dk0 at sd0: "ssd-efi", 522240 blocks at 2048, type: msdos dk1 at sd0: "ssd-ffs", 134217728 blocks at 524288, type: ffs swwdog0: software watchdog initialized WARNING: 4 errors while detecting hardware; check system log. boot device: root device: dk1 dump device: file system (default generic): root on dk1 entropy: best effort /: replaying log to memory root file system type: ffs kern.module.path=/stand/evbarm/10.99.10/modules init path (default /sbin/init): init: trying /sbin/init Enter pathname of shell or RETURN for /bin/sh: #