DDR V1.12 52218f4949 cym 23/07/06-19:46:50 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB Manufacturer ID:0x6 CH0 RX Vref:30.2%, TX Vref:21.8%,20.8% CH1 RX Vref:30.5%, TX Vref:20.8%,19.8% CH2 RX Vref:31.0%, TX Vref:21.8%,19.8% CH3 RX Vref:30.5%, TX Vref:20.8%,19.8% change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz change to F0: 2112MHz out U-Boot SPL board init U-Boot SPL 2017.09-g5f53abfa1e-221223 #zzz (Dec 26 2022 - 09:10:09) Trying to boot from MMC2 MMC: no card present mmc_init: -123, time 0 spl: mmc init failed with error: -123 Trying to boot from MMC1 Card did not respond to voltage select! mmc_init: -95, time 14 spl: mmc init failed with error: -95 Trying to boot from MTD2 No misc partition Trying fit image at 0x800 sector ## Verified-boot: 0 ## Checking atf-1 0x00040000 ... sha256(b40ce543bb...) + OK ## Checking uboot 0x00200000 ... sha256(6bfe01f0f2...) + OK ## Checking fdt 0x00700000 ... sha256(c07f4a4d71...) + OK ## Checking atf-2 0x000f0000 ... sha256(f202de33d9...) + OK ## Checking atf-3 0xff100000 ... sha256(af08976afd...) + OK ## Checking optee 0x08400000 ... sha256(6193f4aac7...) + OK ## Checking nvdata 0x007c0000 ... OK Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000) Total: 633.246 ms INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-616-gdc1125f48:finley.xiao NOTICE: BL31: Built : 16:41:17, Jul 13 2023 INFO: spec: 0x1 INFO: ext 32k is valid INFO: ddr: stride-en 4CH INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0 INFO: system boots from cpu-hwid-0 INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001 INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz INFO: BL31: Initialising Exception Handling Framework INFO: BL31: Initializing runtime services INFO: BL31: Initializing BL32 I/TC: I/TC: OP-TEE version: 3.13.0-698-g7f1ea6d6e #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #53 Wed Apr 19 14:30:22 CST 2023 aarch64 I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 UEFI firmware (version v0.9.1 built at 00:17:55 on Oct 12 2023) >>Start PXE over IPv4. Station IP address is 172.18.129.25 Server IP address is 172.18.129.15 NBP filename is bootaa64.efi NBP filesize is 196056 Bytes Downloading NBP file... NBP file downloaded successfully. boot: client ip: 172.18.129.25 boot: server ip: 172.18.129.15 boot: file name: bootaa64.efi \\-__,------,___. \\ __,---` NetBSD/evbarm efiboot (arm64) \\ `---,_. Revision 2.13 (Mon Oct 2 08:52:05 UTC 2023) \\-,_____,.---` \\ \\ \\ 1. Netboot in fdt mode w/ custom dtb 2. Netboot in ACPI mode 3. prompt Option: [1]:2 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 10.99.10 (GENERIC.opi5) #0: Mon Oct 16 19:52:52 CEST 2023 tnn@lx2k.rymdfartsverket.se:/work/obj/sys/arch/evbarm/compile/GENERIC.opi5 total memory = 16074 MB avail memory = 15495 MB armfdt0 (root) armfdt0: using EFI runtime services for RTC simplebus0 at armfdt0: Orange Pi Orange Pi 5 Plus simplebus1 at simplebus0 acpifdt0 at simplebus0 acpifdt0: SMBIOS rev. 3.3.0 @ 0xea660000 ACPI: RSDP 0x00000000EA690018 000024 (v02 RKCP ) ACPI: XSDT 0x00000000EA69FE98 000084 (v01 RKCP RK3588 00000000 01000013) ACPI: FACP 0x00000000EA69FB98 000114 (v06 RKCP RK3588 00000000 EDK2 00000000) ACPI: DSDT 0x00000000EA697518 0007F3 (v02 RKCP RK3588 00000002 INTL 20200925) ACPI: DBG2 0x00000000EA69FA98 00005C (v00 RKCP RK3588 00000000 EDK2 00000000) ACPI: GTDT 0x00000000EA69FD18 000060 (v02 RKCP RK3588 00000000 EDK2 00000000) ACPI: APIC 0x00000000EA69E998 0002D4 (v04 RKCP RK3588 00000000 EDK2 00000000) ACPI: MCFG 0x00000000EA69F818 00007C (v01 RKCP RK3588 00000000 EDK2 00000000) ACPI: PPTT 0x00000000EA69ED98 000220 (v01 RKCP RK3588 00000000 EDK2 00000000) ACPI: SPCR 0x00000000EA69FE18 000050 (v02 RKCP RK3588 00000000 EDK2 00000000) ACPI: SSDT 0x00000000EA69E318 00026B (v05 RKCP PCIE21L0 00000002 INTL 20200925) ACPI: SSDT 0x00000000EA69F018 00026B (v05 RKCP PCIE21L1 00000002 INTL 20200925) ACPI: SSDT 0x00000000EA69C798 00026B (v05 RKCP PCIE21L2 00000002 INTL 20200925) ACPI: SSDT 0x00000000EA69DC98 000269 (v05 RKCP PCIE34L0 00000002 INTL 20200925) ACPI: BGRT 0x00000000EA69FF98 000038 (v01 INTEL EDK2 00000002 01000013) ACPI: 5 ACPI AML tables successfully acquired and loaded acpi0 at acpifdt0: Intel ACPICA 20230628 cpu0 at acpi0: Arm Cortex-A55 r2p0 (v8.2-A+), id 0x0 cpu0: package 0, core 0, smt 0 cpu1 at acpi0I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot : Arm Cortex-A55 r2p0 (v8.2-A+), id 0x100 cpu1: package 0, core 1, smt 0 cpu2 at acpi0I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot : Arm Cortex-A55 r2p0 (v8.2-A+), id 0x200 cpu2: package 0, core 2, smt 0 cpu3 at acpi0I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot : Arm Cortex-A55 r2p0 (v8.2-A+), id 0x300 cpu3: package 0, core 3, smt 0 cpu4 at acpi0I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot : Arm Cortex-A76 r4p0 (v8.2-A+), id 0x400 cpu4: package 0, core 4, smt 0 cpu5 at acpi0I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot : Arm Cortex-A76 r4p0 (v8.2-A+), id 0x500 cpu5: package 0, core 5, smt 0 cpu6 at acpi0I/TC: Secondary CPU 6 initializing I/TC: Secondary CPU 6 switching to normal world boot : Arm Cortex-A76 r4p0 (v8.2-A+), id 0x600 cpu6: package 0, core 6, smt 0 cpu7 at acpi0I/TC: Secondary CPU 7 initializing I/TC: Secondary CPU 7 switching to normal world boot : Arm Cortex-A76 r4p0 (v8.2-A+), id 0x700 cpu7: package 0, core 7, smt 0 gicvthree0 at acpi0: GICv3 gtmr0 at acpi0: irq 27 armgtmr0 at gtmr0: Generic Timer (24000 kHz, virtual) acpipcd0 at acpi0 (PKG0, ACPI0010-8): Processor Container Device acpipcd1 at acpi0 (CLU0, ACPI0010-9): Processor Container Device CPU0 (ACPI0007) at acpi0 not configured CPU1 (ACPI0007) at acpi0 not configured CPU2 (ACPI0007) at acpi0 not configured CPU3 (ACPI0007) at acpi0 not configured acpipcd2 at acpi0 (CLU1, ACPI0010-10): Processor Container Device CPU4 (ACPI0007) at acpi0 not configured CPU5 (ACPI0007) at acpi0 not configured acpipcd3 at acpi0 (CLU2, ACPI0010-11): Processor Container Device CPU6 (ACPI0007) at acpi0 not configured CPU7 (ACPI0007) at acpi0 not configured sdhc0 at acpi0 (SDC3, RKCP0D40-3): mem 0xfe2e0000-0xfe2effff irq 237 sdhc0: SDHC 4.2, rev 0, 32-bit ADMA2, 200000 kHz, HS SDR50 DDR50 SDR104 HS200 3.0V, re-tuning mode 1, 1024 byte blocks sdmmc0 at sdhc0 slot 0 SDHC (RKCPFE2C) at acpi0 not configured com0 at acpi0 (UAR2, HISI0031-2): mem 0xfeb50000-0xfeb50fff irq 365 com: DesignWare APB UART, 64-byte FIFO com0: console ohci0 at acpi0 (OHC0, PRP0001-0): mem 0xfc840000-0xfc87ffff irq 248 ohci0: OHCI version 1.0 usb0 at ohci0: USB revision 1.0 ohci1 at acpi0 (OHC1, PRP0001-1): mem 0xfc8c0000-0xfc8fffff irq 251 ohci1: OHCI version 1.0 usb1 at ohci1: USB revision 1.0 xhci0 at acpi0 (XHC0, PNP0D10-0): mem 0xfc000000-0xfc3fffff irq 252 usb2 at xhci0: USB revision 3.0 usb3 at xhci0: USB revision 2.0 xhci1 at acpi0 (XHC1, PNP0D10-1): mem 0xfc400000-0xfc7fffff irq 253 usb4 at xhci1: USB revision 3.0 usb5 at xhci1: USB revision 2.0 acpipchb0 at acpi0 (PCI2, PNP0A08-2): PCI Express Host Bridge pci0 at acpipchb0 bus 1 acpipchb1 at acpi0 (PCI3, PNP0A08-3): PCI Express Host Bridge pci1 at acpipchb1 bus 1 rge0 at pci1 dev 0 function 0: vendor 10ec product 8125 (rev. 0x05) rge0: interrupting at irq 277 rge0: Ethernet address c0:74:2b:ff:1d:99 acpipchb2 at acpi0 (PCI4, PNP0A08-4): PCI Express Host Bridge pci2 at acpipchb2 bus 1 rge1 at pci2 dev 0 function 0: vendor 10ec product 8125 (rev. 0x05) rge1: interrupting at irq 282 rge1: Ethernet address c0:74:2b:ff:1d:98 vendor 74c0 product ff2b (miscellaneous prehistoric) at pci2 dev 31 function 0 not configured acpipchb3 at acpi0 (PCI0, PNP0A08-0): PCI Express Host Bridge pci3 at acpipchb3 bus 1 genfb0 at simplebus1: Simple Framebuffer (1920x1080 32-bpp @ 0xe9ce0000) wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation) uhub0 at usb2: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 uhub1 at usb3: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 uhub2 at usb4: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 uhub3 at usb5: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 cpu0: PMU interrupting on irq 23 WARNING: system needs entropy for security; see entropy(7) uhub4 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 uhub5 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 sdmmc0: couldn't enable card: 60 uhub6 at uhub3 port 1: GenesysLogic (0x05e3) USB2.1 Hub (0x0610), class 9/0, rev 2.10/93.91, addr 1 uhub6: multiple transaction translators uhub7 at uhub2 port 1: GenesysLogic (0x05e3) USB3.2 Hub (0x0620), class 9/0, rev 3.20/93.91, addr 2 umass0 at uhub4 port 1 configuration 1 interface 0 umass0: Asmedia (0x174c) ASMT105 (0x55aa), rev 2.10/1.00, addr 2 scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: disk fixed sd0: 223 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 468862128 sectors dk0 at sd0: "ssd-efi", 522240 blocks at 2048, type: msdos dk1 at sd0: "ssd-ffs", 134217728 blocks at 524288, type: ffs swwdog0: software watchdog initialized WARNING: 1 error while detecting hardware; check system log. boot device: rge0 root on rge0 Supported file systems: mfs ffs umap procfs overlay null kernfs fdesc union tmpfs puffs ptyfs efs no file system for rge0 cannot mount root, error = 79 root device (default rge0): dk1 dump device: file system (default generic): root on dk1 entropy: best effort /: replaying log to memory root file system type: ffs kern.module.path=/stand/evbarm/10.99.10/modules init path (default /sbin/init): init: trying /sbin/init Enter pathname of shell or RETURN for /bin/sh: #