Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 10.99.10 (GETHSEMANE) #327: Tue Apr 16 11:59:11 CEST 2024 martin@seven-days-to-the-wolves.aprisoft.de:/work/src/sys/arch/macppc/compile/GETHSEMANE total memory = 1536 MB oea_startup: failed to allocate DEAD ZONE: error=12 avail memory = 1469 MB timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated found openpic PIC at 80040000 OpenPIC Version 1.2: Supports 4 CPUs and 64 interrupt sources. bootpath: /pci@f2000000/mac-io@17/ata-4@1f000/disk@0:11,/netbsd mainbus0 (root) cpu0 at mainbus0: 7450 (Revision 2.1), ID 0 (primary) cpu0: HID0 0x8410c0bc, powersave: -1 cpu0: 800.00 MHz, 256KB L2 cache no parity, 2MB no-parity L3 cache (DDR SRAM) at 4:1 ratio cpu1 at mainbus0: 7450 (Revision 2.1), ID 1 cpu1: HID0 0x8410c0bc, powersave: -1 cpu1: 800.00 MHz, 256KB L2 cache no parity, 2MB no-parity L3 cache (DDR SRAM) at 4:1 ratio memory0 at mainbus0: len=384 spdmem0 at memory0 spdmem0: SDRAM, no parity or ECC, 512MB, 133MHz (PC-133) spdmem0: 13 rows, 10 cols, 2 banks, 4 banks/chip, 7.5ns cycle time spdmem0: tAA-tRCD-tRP-tRAS: 3-20-20-45 spdmem0: voltage LvTTL (not 5V tolerant), refresh time 7.8us (self-refreshing) spdmem1 at memory0 spdmem1: SDRAM, no parity or ECC, 512MB, 133MHz (PC-133) spdmem1: 13 rows, 10 cols, 2 banks, 4 banks/chip, 7.5ns cycle time spdmem1: tAA-tRCD-tRP-tRAS: 3-20-20-45 spdmem1: voltage LvTTL (not 5V tolerant), refresh time 7.8us (self-refreshing) spdmem2 at memory0 spdmem2: SDRAM, no parity or ECC, 512MB, 133MHz (PC-66) spdmem2: 13 rows, 10 cols, 2 banks, 4 banks/chip, 7.5ns cycle time spdmem2: tAA-tRCD-tRP-tRAS: 3-20-20-45 spdmem2: voltage LvTTL (not 5V tolerant), refresh time 7.8us (self-refreshing) uni_n0 at mainbus0 address 0xf8000000 ki2c0 at uni_n0 address 0xf8001000 iic0 at ki2c0: I2C bus uninorth0 at mainbus0 pci0 at uninorth0 bus 0 pci0: i/o space, memory space enabled pchb0 at pci0 dev 11 function 0 pchb0: Apple Computer UniNorth AGP Interface (rev. 0x00) gffb0 at pci0 dev 16 function 0: NVIDIA GeForce2 MX (rev. 0xb2) autoconfiguration error: gffb0: no width property uninorth1 at mainbus0 pci1 at uninorth1 bus 0 pci1: i/o space, memory space enabled pchb1 at pci1 dev 11 function 0 pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00) cbb0 at pci1 dev 19 function 0: Ricoh 5C475 PCI-CardBus Bridge (rev. 0x81) ppb0 at pci1 dev 20 function 0: Texas Instruments product ac23 (rev. 0x02) pci2 at ppb0 bus 2 pci2: i/o space, memory space enabled ohci0 at pci2 dev 8 function 0: NEC USB Host Controller (rev. 0x43) ohci0: interrupting at irq 54 ohci0: OHCI version 1.0 usb0 at ohci0: USB revision 1.0 ohci1 at pci2 dev 8 function 1: NEC USB Host Controller (rev. 0x43) ohci1: interrupting at irq 54 ohci1: OHCI version 1.0 usb1 at ohci1: USB revision 1.0 ehci0 at pci2 dev 8 function 2: NEC USB2 Host Controller (rev. 0x04) ehci0: 32-bit DMA ehci0: interrupting at irq 54 ehci0: EHCI version 1.0 ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1 usb2 at ehci0: USB revision 2.0 fwohci0 at pci2 dev 11 function 0: Texas Instruments TSB43AA23 IEEE 1394 Host Controller (rev. 0x00) fwohci0: interrupting at irq 54 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:05:16:00:00:41:f8:4a fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. ieee1394if0 at fwohci0: IEEE1394 bus fwip0 at ieee1394if0: IP over IEEE1394 fwohci0: Initiate bus reset fwohci0: Clear PME# now obio0 at pci1 dev 23 function 0: addr 0x80000000 obio0: enabling KeyLargo internal modem zsc0 at obio0 irq 22,23 zstty0 at zsc0 channel 0 (console i/o) zstty1 at zsc0 channel 1 snapper0 at obio0 offset 0x10000: irq 30,1,2 pmu0 at obio0 offset 0x16000 irq 47: rev. 12 pmu0: initializing RTC pmu0: power-mgt not configured ki2c1 at obio0 iic1 at ki2c1: I2C bus deq0 at iic1 addr 0x34 Audio Codec (tas3001) wdc0 at obio0 offset 0x1f000 irq 19, level triggered: DMA transfer atabus0 at wdc0 channel 0 wdc1 at obio0 offset 0x20000 irq 20, level triggered: DMA transfer atabus1 at wdc1 channel 0 wdc2 at obio0 offset 0x21000 irq 21, level triggered: DMA transfer atabus2 at wdc2 channel 0 snapper0: codec: TAS3001 onewire at snapper0 not configured audio0 at snapper0: playback, capture, full duplex audio0: slinear_be:16 2ch 48000Hz, blk 12288 bytes (64ms) for playback audio0: slinear_be:16 2ch 48000Hz, blk 12288 bytes (64ms) for recording spkr0 at audio0: PC Speaker (synthesized) wsbell at spkr0 not configured ohci2 at pci1 dev 24 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00) ohci2: interrupting at irq 27 ohci2: OHCI version 1.0 usb3 at ohci2: USB revision 1.0 ohci3 at pci1 dev 25 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00) ohci3: interrupting at irq 28 ohci3: OHCI version 1.0 usb4 at ohci3: USB revision 1.0 cbb0: cacheline 0x0 lattimer 0x10 cbb0: bhlc 0x21000 cbb0: interrupting at irq 53 cardslot0 at cbb0 cardbus0 at cardslot0: bus 1 pcmcia0 at cardslot0 uninorth2 at mainbus0 pci3 at uninorth2 bus 0 pci3: i/o space, memory space enabled pchb2 at pci3 dev 11 function 0 pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00) fwohci1 at pci3 dev 14 function 0: Lucent Technologies FW322/323 IEEE 1394 Host Controller (rev. 0x00) fwohci1: interrupting at irq 40 fwohci1: OHCI version 1.0 (ROM=0) fwohci1: No. of Isochronous channels is 8. fwohci1: EUI64 00:03:93:ff:fe:71:ff:cc fwohci1: Phy 1394a available S400, 2 ports. fwohci1: Link S400, max_rec 2048 bytes. ieee1394if1 at fwohci1: IEEE1394 bus fwip1 at ieee1394if1: IP over IEEE1394 fwohci1: Initiate bus reset fwohci1: Clear PME# now gem0 at pci3 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x01) gem0: interrupting at irq 41 brgphy0 at gem0 phy 0: BCM5411 1000BASE-T media interface, rev. 1 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto gem0: Ethernet address 00:03:93:71:ff:cc, 10KB RX fifo, 4KB TX fifo vmmask 39ef8000 schedmask 3fff8000 highmask 7fff8000 timecounter: Timecounter "mftb" frequency 33290001 Hz quality 100 fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) ieee1394if0: bus manager 0 fwohci1: BUS reset fwohci1: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode ieee1394if1: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) ieee1394if1: bus manager 0 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 cpu1 started WARNING: system needs entropy for security; see entropy(7) uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 uhub2: 5 ports with 5 removable, self powered uhub3 at usb3: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhub4 at usb4: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered wd0 at atabus0 drive 0 wd0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 186 GB, 387621 cyl, 16 head, 63 sec, 512 bytes/sect x 390721968 sectors IPsec: Initialized Security Association Processing. wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd1 at atabus0 drive 1 wd1: wd1: drive supports 64-sector PIO transfers, LBA48 addressing wd1: 372 GB, 775221 cyl, 16 head, 63 sec, 512 bytes/sect x 781422768 sectors wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) (using DMA) wd1(wdc0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) (using DMA), WRITE DMA FUA EXT atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) sd0 at atapibus0 drive 1: disk removable sd0: drive offline sd0: drive supports PIO mode 3, DMA mode 1, Ultra-DMA mode 2 (Ultra/33) cd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA) sd0(wdc1:0:1): using PIO mode 3, DMA mode 1 (using DMA) swwdog0: software watchdog initialized WARNING: 1 error while detecting hardware; check system log. boot device: wd0 root on wd0e dumps on wd0b kern.module.path=/stand/macppc/10.99.10/modules entropy: best effort entropy: ready