Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 10.99.12 (GENERIC) #381: Mon Dec 2 12:25:39 CET 2024 martin@seven-days-to-the-wolves.aprisoft.de:/work/src/sys/arch/evbarm/compile/GENERIC total memory = 2045 MB avail memory = 1988 MB timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated armfdt0 (root) simplebus0 at armfdt0: Cubietech Cubietruck simplebus1 at simplebus0 cpus0 at simplebus0 simplebus2 at simplebus0 simplebus3 at simplebus0 cpu0 at cpus0: Cortex-A7 r0p4 (Cortex V7A core) cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled cpu0: L1 32KB/32B 2-way (512 set) VIPT Instruction cache cpu0: L1 32KB/64B 4-way (128 set) write-back-locking-C PIPT Data cache cpu0: L2 256KB/64B 8-way (512 set) write-through PIPT Unified cache vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals cpufreqdt0 at cpu0 cpu1 at cpus0: Cortex-A7 r0p4 (Cortex V7A core) cpu1: DC enabled IC enabled WB enabled LABT branch prediction enabled cpu1: L1 32KB/32B 2-way (512 set) VIPT Instruction cache cpu1: L1 32KB/64B 4-way (128 set) write-back-locking-C PIPT Data cache cpu1: L2 256KB/64B 8-way (512 set) write-through PIPT Unified cache vfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals cpufreqdt1 at cpu1 gic0 at simplebus1: GIC armgic0 at gic0: Generic Interrupt Controller, 160 sources (150 valid) armgic0: 16 Priorities, 128 SPIs, 7 PPIs, 15 SGIs fclock0 at simplebus2: 25000000 Hz fixed clock (mii_phy_tx) fclock1 at simplebus2: 125000000 Hz fixed clock (gmac_int_tx) fclock2 at simplebus2: 24000000 Hz fixed clock (osc24M) fclock3 at simplebus2: 32768 Hz fixed clock (osc32k) gtmr0 at simplebus0: Generic Timer gtmr0: interrupting on GIC irq 27 armgtmr0 at gtmr0: Generic Timer (24000 kHz, virtual) timecounter: Timecounter "armgtmr0" frequency 24000000 Hz quality 500 sun4ia10ccu0 at simplebus1: A20 CCU sunxinmi0 at simplebus1: NMI, NMI IRQ 0 sunxigmacclk0 at simplebus2: GMAC MII/RGMII clock mux sunxigpio0 at simplebus1: PIO gpio0 at sunxigpio0: 175 pins sunxigpio0: interrupting on GIC irq 60 sun4idma0 at simplebus1: DMA controller sun4idma0: interrupting on GIC irq 59 sunxisramc0 at simplebus1: SRAM Controller sunxisramc0: area: SRAM A3/A4 sunxisramc0: area: SRAM D sunxidebe0 at simplebus1: Display Engine Backend (display-backend@1e60000) sunxidebe1 at simplebus1: Display Engine Backend (display-backend@1e40000) sunxihdmi0 at simplebus1: HDMI 1.3 sunxitcon0 at simplebus1: LCD/TV timing controller (lcd-controller@1c0c000) sunxitcon0: tcon unit 0 sunxidebe0: debe unit 0 sunxidebe1: debe unit 1 sunxitcon1 at simplebus1: LCD/TV timing controller (lcd-controller@1c0d000) sunxitcon1: tcon unit 1 connector0 at simplebus0: HDMI connector sunxisid0 at simplebus1: Security ID EFUSE com0 at simplebus1: DesignWare APB UART, 64-byte FIFO com0: console com0: interrupting on GIC irq 33 com1 at simplebus1: DesignWare APB UART, 64-byte FIFO com1: interrupting on GIC irq 35 fregulator0 at simplebus0: vcc3v3 fregulator1 at simplebus0: usb0-vbus fregulator2 at simplebus0: usb1-vbus fregulator3 at simplebus0: usb2-vbus fregulator4 at simplebus0: ahci-5v sunxidep0 at simplebus0: autoconfiguration error: can't activate pipeline 0 sunxidep0: autoconfiguration error: can't activate pipeline 1 fregulator5 at simplebus0: vcc3v0 fregulator6 at simplebus0: vcc5v0 sunxiusbphy0 at simplebus1: USB PHY sunxitwi0 at simplebus1: Marvell TWSI controller sunxitwi0: interrupting on GIC irq 39 iic0 at sunxitwi0: I2C bus axp20x0 at iic0 addr 0x34: AC used, battery present axp20x0: DCDC2 1400mV axp20x0: DCDC3 1250mV axp20x0: LDO2 3000mV, LDO4 3300mV axp20x0: LDO3 2800mV axp20x0: RTC supercap charger enabled: 3000mV at 200uA axp20xreg0 at axp20x0: dcdc2 (vdd-cpu) axp20xreg1 at axp20x0: dcdc3 (vdd-int-dll) sunxits0 at simplebus1: Touch Screen Controller sunxits0: interrupting on GIC irq 61 /soc/display-frontend@1e00000 at simplebus1 not configured /soc/display-frontend@1e20000 at simplebus1 not configured mmcpwrseq0 at simplebus0: Simple MMC power sequence provider awge0 at simplebus1: GMAC awge0: interrupting on GIC irq 117 awge0: Core version: 00000000 awge0: Ethernet address 02:0e:03:41:63:14 rgephy0 at awge0 phy 1: RTL8211E 1000BASE-T media interface rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto /soc/spdif@1c21000 at simplebus1 not configured /spdif-out at simplebus0 not configured sunximmc0 at simplebus1: SD/MMC controller sunximmc0: interrupting on GIC irq 64 sunximmc1 at simplebus1: SD/MMC controller sunximmc1: interrupting on GIC irq 67 motg0 at simplebus1: 'otg' mode not supported ehci0 at simplebus1: EHCI ehci0: interrupting on GIC irq 71 ehci0: EHCI version 1.0 ehci0: 1 companion controller, 1 port usb0 at ehci0: USB revision 2.0 ohci0 at simplebus1: OHCI ohci0: interrupting on GIC irq 96 ohci0: OHCI version 1.0 usb1 at ohci0: USB revision 1.0 /soc/crypto-engine@1c15000 at simplebus1 not configured ahcisata0 at simplebus1: SATA ahcisata0: interrupting on GIC irq 88 ahcisata0: ignoring broken port multiplier support ahcisata0: AHCI revision 1.10, 1 port, 32 slots, CAP 0x6f24ff80 atabus0 at ahcisata0 channel 0 ehci1 at simplebus1: EHCI ehci1: interrupting on GIC irq 72 ehci1: EHCI version 1.0 ehci1: 1 companion controller, 1 port usb2 at ehci1: USB revision 2.0 ohci1 at simplebus1: OHCI ohci1: interrupting on GIC irq 97 ohci1: OHCI version 1.0 usb3 at ohci1: USB revision 1.0 sunxiwdt0 at simplebus1: Watchdog sunxiwdt0: default watchdog period is 16 seconds sunxirtc0 at simplebus1: RTC /soc/pwm@1c20e00 at simplebus1 not configured /soc/ir@1c21800 at simplebus1 not configured sunxicodec0 at simplebus1: A10 Audio Codec audio0 at sunxicodec0: playback, capture, full duplex, independent audio0: slinear_be:16 -> slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback audio0: slinear_be:16 <- slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording spkr0 at audio0: PC Speaker (synthesized) wsbell at spkr0 not configured sunxitwi1 at simplebus1: Marvell TWSI controller sunxitwi1: interrupting on GIC irq 40 iic1 at sunxitwi1: I2C bus sunxitwi2 at simplebus1: Marvell TWSI controller sunxitwi2: interrupting on GIC irq 41 iic2 at sunxitwi2: I2C bus /soc/gpu@1c40000 at simplebus1 not configured psci0 at simplebus0: PSCI 0.1 armpmu0 at simplebus0: Performance Monitor Unit gpioleds0 at simplebus0: cubietruck:blue:usr cubietruck:orange:usr cubietruck:white:usr cubietruck:green:usr ausoc0 at simplebus0: On-board SPDIF /soc/video-codec@1c0e000 at simplebus1 not configured sunxitimer0 at simplebus1: Timer timecounter: Timecounter "Timer 2" frequency 24000000 Hz quality 200 timecounter: Timecounter "LOSC" frequency 32768 Hz quality 150 sunxihstimer0 at simplebus1: High Speed Timer timecounter: Timecounter "hstimer" frequency 152000000 Hz quality 300 sunxihstimer0: interrupting on GIC irq 113 genfb0 at simplebus3: Simple Framebuffer (1024x768 32-bpp @ 0xbfd00000) genfb0: framebuffer at 0xbfd00000, size 1024x768, depth 32, stride 4096 wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation) wsmux1: connecting to wsdisplay0 wsdisplay0: screen 1-3 added (default, vt100 emulation) ausoc0: autoconfiguration error: couldn't acquire cpu dai on sound node WARNING: system needs entropy for security; see entropy(7) timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 cpu_hatch(cpu1): vectors vbar=0x800a9fe0 stacks tlb md(0x8008bc4c) interrupts done! cpufreqdt0: rate: 960.000 MHz, 1400000 uV cpufreqdt1: rate: 960.000 MHz, 1400000 uV sdmmc0 at sunximmc0 sdmmc1 at sunximmc1 armpmu0: interrupting on GIC irq 152 armpmu0: interrupting on GIC irq 153 uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 uhub0: 1 port with 1 removable, self powered uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 uhub1: 1 port with 1 removable, self powered uhub2 at usb3: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 uhub2: 1 port with 1 removable, self powered uhub3 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 uhub3: 1 port with 1 removable, self powered ahcisata0 port 0: device present, speed: 3.0Gb/s IPsec: Initialized Security Association Processing. sdmmc0: SD card status: 4-bit, C6 ld0 at sdmmc0: <0x00:0x0000:USD :0x00:0x00000000:0x0d1> ld0: 1920 MB, 975 cyl, 64 head, 63 sec, 512 bytes/sect x 3932160 sectors ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz sdmmc1: 4-bit width, 50.000 MHz bwfm0 at sdmmc1 function 1 (manufacturer 0x2d0, product 0xa962) at sdmmc1 function 2 not configured wd0 at atabus0 drive 0 wd0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 119 GB, 248085 cyl, 16 head, 63 sec, 512 bytes/sect x 250069680 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100), WRITE DMA FUA, NCQ (32 tags) w/PRIO wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA), NCQ (31 tags) w/PRIO swwdog0: software watchdog initialized WARNING: 3 errors while detecting hardware; check system log. boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs kern.module.path=/stand/evbarm/10.99.12/modules bwfm0: Firmware file default: brcmfmac43362-sdio.bin bwfm0: Firmware file model-spec: brcmfmac43362-sdio.cubietech,cubietruck.bin bwfm0: Found Firmware file: brcmfmac43362-sdio.bin bwfm0: NVRAM file default: brcmfmac43362-sdio.txt bwfm0: NVRAM file model-spec: brcmfmac43362-sdio.cubietech,cubietruck.txt bwfm0: Found NVRAM file: brcmfmac43362-sdio.cubietech,cubietruck.txt bwfm0: CLM file default: brcmfmac43362-sdio.clm_blob bwfm0: CLM file model-spec: brcmfmac43362-sdio.cubietech,cubietruck.clm_blob sunximmc1: WARNING: driver submitted a command while the controller was busy sdmmc1: extended I/O error 16, r=40992 p=0xc48f3e8c l=4 read bwfm0: CHIPACTIVE bwfm0: address 98:3b:16:1e:6d:29 bwfm0: wl0: May 16 2018 23:42:49 version 5.90.244 FWID 01-0 entropy: best effort entropy: ready