Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 9.99.93 (UNPLUGED) #424: Mon Feb 28 11:26:34 CET 2022 martin@seven-days-to-the-wolves.aprisoft.de:/work/src/sys/arch/evbarm/compile/UNPLUGED total memory = 512 MB avail memory = 495 MB timecounter: Timecounters tick every 10.000 msec mainbus0 (root) cpu0 at mainbus0 core 0: Sheeva 88SV131 rev 1 (ARM9E-S V5TE core) cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled cpu0: L1 16KB/32B 4-way (128 set) VIVT Instruction cache cpu0: L1 16KB/32B 4-way (128 set) write-back-locking-C VIVT Data cache mvsoc0 at mainbus0: Marvell 88F6281 Rev. A1 Kirkwood mvsoc0: CPU Clock 1200.000 MHz SysClock 400.000 MHz TClock 200.000 MHz mvsoctmr0 at mvsoc0 unit 0 offset 0x20300-0x203ff irq 65: Marvell SoC Timer mvsocgpp0 at mvsoc0 unit 0 offset 0x10100-0x101ff irq 35: Marvell SoC General Purpose I/O Port Interface mvsocgpp0: 50 gpio pins mvsocgpp0: interrupts 96..103, intr 35 mvsocgpp0: interrupts 104..111, intr 36 mvsocgpp0: interrupts 112..119, intr 37 mvsocgpp0: interrupts 120..127, intr 38 mvsocgpp0: interrupts 128..135, intr 39 mvsocgpp0: interrupts 136..143, intr 40 mvsocgpp0: interrupts 144..151, intr 41 mvsocgpp0: Data Out: 0x00000000 mvsocgpp0: Data Out Enable Control: 0xffffffff mvsocgpp0: Data Blink Enable: 0x00000000 mvsocgpp0: Data In Polarity: 0x00000000 mvsocgpp0: Data In: 0x00000080 mvsocgpp0: Interrupt Cause: 0x00000000 mvsocgpp0: Interrupt Mask: 0x00000000 mvsocgpp0: Interrupt Level Mask: 0x00000000 mvsocgpp0: High Data Out: 0x000f0000 mvsocgpp0: High Data Out Enable Ctrl: 0xffffffff mvsocgpp0: High Blink Enable: 0x00000000 mvsocgpp0: High Data In Polarity: 0x00000000 mvsocgpp0: High Data In: 0x0003f000 mvsocgpp0: High Interrupt Cause: 0x00000000 mvsocgpp0: High Interrupt Mask: 0x00000000 mvsocgpp0: High Interrupt Level Mask: 0x00000000 gpio0 at mvsocgpp0: 50 pins mvsocrtc0 at mvsoc0 unit 0 offset 0x10300-0x10317: Marvell SoC Real Time Clock com0 at mvsoc0 unit 0 offset 0x12000-0x1201f irq 33: ns16550a, 16-byte FIFO com0: console com1 at mvsoc0 unit 1 offset 0x12100-0x1211f irq 34: ns16550a, 16-byte FIFO ehci0 at mvsoc0 unit 0 offset 0x50000-0x50fff irq 19: Marvell USB 2.0 Interface ehci0: EHCI version 1.0 usb0 at ehci0: USB revision 2.0 gtidmac0 at mvsoc0 unit 0 offset 0x60000-0x60fff: Marvell IDMA Controller/XOR Engine gtidmac0: XOR Engine 4 channels, intr 5, 6, 7, 8 gttwsi0 at mvsoc0 unit 0 offset 0x11000-0x110ff irq 29: Marvell TWSI controller iic0 at gttwsi0: I2C bus mvcesa0 at mvsoc0 unit 0 offset 0x3d000-0x3dfff irq 22: Marvell Cryptographic Engines and Security Accelerator mvgbec0 at mvsoc0 unit 0 offset 0x70000-0x73fff: Marvell Gigabit Ethernet Controller mvgbe0 at mvgbec0 port 0 irq 11 mvgbe0: Ethernet address 00:50:43:01:83:1e makphy0 at mvgbe0 phy 0: Marvell 88E1149 Gigabit PHY, rev. 3 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto mvgbec1 at mvsoc0 unit 1 offset 0x74000-0x77fff: Marvell Gigabit Ethernet Controller mvgbe at mvgbec1 port 0 not configured mvpex0 at mvsoc0 unit 0 offset 0x40000-0x41fff irq 9: Marvell PCI Express Interface pci0 at mvpex0 pci0: i/o space, memory space enabled vendor 11ab product 6281 (miscellaneous memory, revision 0x03) at pci0 dev 0 function 0 not configured mvsata0 at mvsoc0 unit 0 offset 0x80000-0x87fff irq 21: Marvell Serial-ATA Host Controller (SATAHC) mvsata0: GenIIe, 1hc, 2port/hc atabus0 at mvsata0 channel 0 atabus1 at mvsata0 channel 1 mvsdio0 at mvsoc0 unit 0 offset 0x90000-0x9ffff irq 28: Marvell Secure Digital Input/Output Interface sdmmc0 at mvsdio0 entropy: WARNING: extracting entropy too early timecounter: Timecounter "mvsoctmr0" frequency 200000000 Hz quality 100 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 aes: BearSSL aes_ct chacha: Portable C ChaCha uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 uhub0: 1 port with 1 removable, self powered 15 1f 01 00 4d 61 72 76 65 6c 6c 00 38 30 32 2e 31 31 20 53 44 49 4f 20 49 44 3a 20 31 30 00 00 ff CISTPL_VERS_1 20 04 df 02 03 91 CISTPL_MANFID 21 02 0c 00 CISTPL_FUNCID 22 04 00 00 01 5a CISTPL_FUNCE: FN0_BLK_SIZE=0x100, MAX_TRAN_SPEED=0x5a(50000kHz) ff CISTPL_END sdmmc0: 4-bit width, 50.000 MHz sdmmc0: autoconfiguration error: bad CIS ptr 0 sdmmc0: autoconfiguration error: couldn't read CIS sdmmc0: autoconfiguration error: i/o init failed sdmmc0: autoconfiguration error: bad CIS ptr 0 sdmmc0: autoconfiguration error: couldn't read CIS sdmmc0: autoconfiguration error: i/o init failed "Marvell, 802.11 SDIO ID: 10, " (manufacturer 0x2df, product 0x9103) at sdmmc0 function 1 not configured "Marvell, 802.11 SDIO ID: 10, " (manufacturer 0x2df, product 0x9103) at sdmmc0 function 2 not configured uhub1 at uhub0 port 1: Genesys Logic (0x05e3) USB2.0 Hub (0x0608), class 9/0, rev 2.00/77.60, addr 2 uhub1: single transaction translator uhub1: 4 ports with 4 removable, self powered umass0 at uhub1 port 1 configuration 1 interface 0 umass0: Genesys Logic (0x05e3) USB Storage (0x0726), rev 2.00/99.09, addr 3 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 2 luns per target sd0 at scsibus0 target 0 lun 0: disk removable sd0: drive offline sd1 at scsibus0 target 0 lun 1: disk removable sd1: drive offline uhub2 at uhub1 port 3: NEC (0x0409) product 005a (0x005a), class 9/0, rev 2.00/1.00, addr 4 uhub2: single transaction translator uhub2: 2 ports with 0 removable, self powered umcs0 at uhub2 port 1: MosChip Semiconductor (0x9710) MCS7840 USB Serial Adapter (0x7840), rev 2.00/0.01, addr 5 umcs0: found 4 active ports umcs0: On-die confguration: RST: active low, HRD: yes, PLL: avail, POR: avail, Ports: 4, EEPROM write disabled, IrDA is not available ucom0 at umcs0 portno 0 ucom1 at umcs0 portno 1 ucom2 at umcs0 portno 2 ucom3 at umcs0 portno 3 umcs1 at uhub2 port 2: MosChip Semiconductor (0x9710) MCS7840 USB Serial Adapter (0x7840), rev 2.00/0.01, addr 6 umcs1: found 4 active ports umcs1: On-die confguration: RST: active low, HRD: yes, PLL: avail, POR: avail, Ports: 4, EEPROM write disabled, IrDA is not available ucom4 at umcs1 portno 0 ucom5 at umcs1 portno 1 ucom6 at umcs1 portno 2 ucom7 at umcs1 portno 3 WARNING: 6 errors while detecting hardware; check system log. boot device: root on mvgbe0 nfs_boot: trying DHCP/BOOTP nfs_boot: DHCP next-server: 192.168.150.188 nfs_boot: my_domain=duskware.de nfs_boot: my_addr=192.168.150.127 nfs_boot: my_mask=255.255.254.0 nfs_boot: gateway=192.168.151.1 root on 192.168.150.188:/hosts/evbarm kern.module.path=/stand/evbarm/9.99.93/modules entropy: ready