Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 5.99.22 (GENERIC.ixp) #1: Wed Nov 11 16:00:25 CET 2009 tnn@ixp.nygren.pp.se:/work/obj/sys/arch/amd64/compile/GENERIC.ixp total memory = 2030 MB avail memory = 1954 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 ( ) mainbus0 (root) cpu0 at mainbus0 apid 0: AMD 686-class, 1790MHz, id 0x10ff0 cpu0: erratum 89 present cpu0: erratum 104 present cpu0: erratum 101 present cpu0: erratum 106 present cpu0: erratum 107 present cpu0: WARNING: errata present, BIOS upgrade may be cpu0: WARNING: necessary to ensure reliable operation ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 21, 24 pins acpi0 at mainbus0: Intel ACPICA 20090730 acpi0: X/RSDT: OemId , AslId acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 ACPI-Safe 32-bit timer acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 FDC0 (PNP0700) at acpi0 not configured UAR1 (PNP0501) at acpi0 not configured LPT1 (PNP0400) at acpi0 not configured attimer1: attached to pcppi1 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 0x1002 product 0x5950 (rev. 0x00) ppb0 at pci0 dev 1 function 0: vendor 0x1002 product 0x5a3f (rev. 0x00) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga0 at pci1 dev 5 function 0: vendor 0x1002 product 0x5954 (rev. 0x00) wsdisplay0 at vga0 kbdmux 1 wsmux1: connecting to wsdisplay0 radeondrm0 at vga0: ATI RS480 XPRESS 200G radeondrm0: Initialized radeon 1.29.0 20080613 ixpide0 at pci0 dev 17 function 0: ATI Technologies IXP IDE Controller (rev. 0x00) ixpide0: bus-master DMA support present ixpide0: primary channel configured to native-PCI mode ixpide0: using ioapic0 pin 23 for native-PCI interrupt atabus0 at ixpide0 channel 0 ixpide0: secondary channel configured to native-PCI mode atabus1 at ixpide0 channel 1 ixpide1 at pci0 dev 18 function 0: ATI Technologies IXP IDE Controller (rev. 0x00) ixpide1: bus-master DMA support present ixpide1: primary channel configured to native-PCI mode ixpide1: using ioapic0 pin 22 for native-PCI interrupt atabus2 at ixpide1 channel 0 ixpide1: secondary channel configured to native-PCI mode atabus3 at ixpide1 channel 1 ohci0 at pci0 dev 19 function 0: vendor 0x1002 product 0x4374 (rev. 0x00) ohci0: interrupting at ioapic0 pin 19 ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 ohci1 at pci0 dev 19 function 1: vendor 0x1002 product 0x4375 (rev. 0x00) ohci1: interrupting at ioapic0 pin 19 ohci1: OHCI version 1.0, legacy support usb1 at ohci1: USB revision 1.0 ehci0 at pci0 dev 19 function 2: vendor 0x1002 product 0x4373 (rev. 0x00) ehci0: interrupting at ioapic0 pin 19 ehci0: dropped intr workaround enabled ehci0: EHCI version 1.0 ehci0: companion controllers, 4 ports each: ohci0 ohci1 usb2 at ehci0: USB revision 2.0 piixpm0 at pci0 dev 20 function 0 piixpm0: vendor 0x1002 product 0x4372 (rev. 0x04) piixpm0: interrupting at SMI, polling iic0 at piixpm0: I2C bus ixpide2 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 0x00) ixpide2: bus-master DMA support present ixpide2: primary channel configured to compatibility mode ixpide2: primary channel interrupting at ioapic0 pin 14 atabus4 at ixpide2 channel 0 ixpide2: secondary channel configured to compatibility mode ixpide2: secondary channel interrupting at ioapic0 pin 15 atabus5 at ixpide2 channel 1 pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x4377 (rev. 0x00) ppb1 at pci0 dev 20 function 4: vendor 0x1002 product 0x4371 (rev. 0x00) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled wm0 at pci2 dev 0 function 0: Intel i82541PI 1000BASE-T Ethernet, rev. 5 wm0: interrupting at ioapic0 pin 20 wm0: 32-bit 33MHz PCI bus wm0: 64 word (6 address bits) MicroWire EEPROM wm0: Ethernet address 00:1b:21:4d:a9:66 igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0 igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto satalink0 at pci2 dev 1 function 0: Silicon Image SATALink 3114 (rev. 0x02) satalink0: 33MHz PCI bus satalink0: bus-master DMA support present satalink0: using ioapic0 pin 21 for native-PCI interrupt atabus6 at satalink0 channel 0 atabus7 at satalink0 channel 1 atabus8 at satalink0 channel 2 atabus9 at satalink0 channel 3 skc0 at pci2 dev 2 function 0: ioapic0 pin 22 skc0: interrupt moderation is 0 us skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9) sk0 at skc0 port A: Ethernet address 00:19:5b:2f:15:41 makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto rtk0 at pci2 dev 3 function 0: Realtek 8139 10/100BaseTX (rev. 0x10) rtk0: interrupting at ioapic0 pin 20 rtk0: Ethernet address 00:11:09:bc:7b:27 rlphy0 at rtk0 phy 7: Realtek internal PHY rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto auixp0 at pci0 dev 20 function 5: vendor 0x1002 product 0x4370 (rev. 0x00) auixp0: interrupting at ioapic0 pin 17 auixp0: soft resetting aclink pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1100 (rev. 0x00) pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1101 (rev. 0x00) pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1102 (rev. 0x00) pchb4 at pci0 dev 24 function 3: vendor 0x1022 product 0x1103 (rev. 0x00) isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console pckbc0 at isa0 port 0x60-0x64 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 satalink0: port 1: device present, speed: 1.5Gb/s satalink0: port 2: device present, speed: 1.5Gb/s auixp0: ac97: Avance Logic ALC658 codec; 20 bit DAC, 18 bit ADC, no 3D stereo auixp0: ac97: ext id 0x9c7 audio0 at auixp0: full duplex, playback, capture, mmap, independent auixp0: codec spdif support detected but disabled for now uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered uhub2 at usb2: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 8 ports with 8 removable, self powered wd0 at atabus1 drive 0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(ixpide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) wd1 at atabus2 drive 0: wd1: drive supports 16-sector PIO transfers, LBA48 addressing wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7 wd1(ixpide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) wd2 at atabus3 drive 0: wd2: drive supports 16-sector PIO transfers, LBA48 addressing wd2: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors wd2: 32-bit data port wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7 wd2(ixpide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) wd3 at atabus7 drive 0: wd3: drive supports 16-sector PIO transfers, LBA48 addressing wd3: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors wd3: 32-bit data port wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd3(satalink0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) wd4 at atabus8 drive 0: wd4: drive supports 16-sector PIO transfers, LBA48 addressing wd4: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors wd4: 32-bit data port wd4: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd4(satalink0:2:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) Kernelized RAIDframe activated pad0: outputs: 44100Hz, 16-bit, stereo audio1 at pad0: half duplex, playback, capture raid2: RAID Level 1 raid2: Components: /dev/wd1a /dev/wd2a raid2: Total Sectors: 1953524992 (953869 MB) raid4: RAID Level 5 raid4: Components: /dev/wd3a /dev/wd0a /dev/wd4a raid4: Total Sectors: 1953546176 (953879 MB) boot device: raid2 root on raid2a dumps on raid2b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)