halted CPU 0 halt code = 5 HALT instruction executed PC = fffffc0000a00128 CPU 0 booting Reseting I/O buses... (boot dqa0.0.0.13.0 -flags AVS) block 0 of dqa0.0.0.13.0 is a valid boot block reading 13 blocks from dqa0.0.0.13.0 bootstrap code read in base = 2ce000, image_start = 0, image_bytes = 1a00 initializing HWRPB at 2000 initializing page table at 7ffe8000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code NetBSD/alpha 9.99.81 FFSv2 Primary Bootstrap Jumping to entry point... NetBSD/alpha 9.99.81 Secondary Bootstrap, Revision 1.13 (Wed Apr 14 12:40:30 UTC 2021) VMS PAL rev: 0x1004700010154 OSF PAL rev: 0x1003f0002014f Switch to OSF PAL code succeeded. Boot flags: AVS 13314960+240144 [659832+433377]=0xdf8b08 Entering netbsd at 0xfffffc0000a01350... [ 1.0000000] consinit: not using prom console [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019, 2020, 2021 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 9.99.82 (GENERIC-$Revision: 1.411 $) #0: Mon Jul 5 10:01:39 JST 2021 [ 1.0000000] rin@latipes:/build/work/src/sys/arch/alpha/compile/DS10 [ 1.0000000] COMPAQ AlphaServer DS10 466 MHz, s/n [ 1.0000000] 8192 byte page size, 1 processor. [ 1.0000000] total memory = 2048 MB [ 1.0000000] (2976 KB reserved for PROM, 2045 MB used by NetBSD) [ 1.0000000] avail memory = 2006 MB [ 1.0000000] timecounter: Timecounters tick every 0.976 msec [ 1.0000000] Kernelized RAIDframe activated [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0: ID 0 (primary), 21264-4 (EV6) [ 1.0000000] cpu0: Architecture extensions: 0x303 [ 1.0000000] tsc0 at mainbus0: 21272 Core Logic Chipset, Cchip rev 0 [ 1.0000000] tsc0: 2 Dchips, 1 memory bus of 16 bytes [ 1.0000000] tsc0: arrays present: 1024MB, 1024MB, 0MB, 0MB, Dchip 0 rev 1 [ 1.0000000] tsp0 at tsc0 [ 1.0000000] pci0 at tsp0 bus 0 [ 1.0000000] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.0000000] sio0 at pci0 dev 7 function 0: Acer Labs M1533 PCI-ISA Bridge (rev. 0xc3) [ 1.0000000] tlp0 at pci0 dev 9 function 0: DECchip 21143 Ethernet, pass 4.1 [ 1.0000000] tlp0: interrupting at dec 6600 irq 29 [ 1.0000000] tlp0: DEC, Ethernet address 08:00:2b:87:2a:9b [ 1.0000000] tlp0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.0000000] tlp1 at pci0 dev 11 function 0: DECchip 21143 Ethernet, pass 4.1 [ 1.0000000] tlp1: interrupting at dec 6600 irq 30 [ 1.0000000] tlp1: DEC, Ethernet address 08:00:2b:87:2f:7b [ 1.0000000] tlp1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.0000000] aceride0 at pci0 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc1) [ 1.0000000] aceride0: bus-master DMA support present, but unused (forced off by config file) [ 1.0000000] aceride0: primary channel wired to compatibility mode [ 1.0000000] aceride0: primary channel interrupting at isa irq 14 [ 1.0000000] atabus0 at aceride0 channel 0 [ 1.0000000] aceride0: secondary channel wired to compatibility mode [ 1.0000000] aceride0: secondary channel interrupting at isa irq 15 [ 1.0000000] atabus1 at aceride0 channel 1 [ 1.0000000] ppb0 at pci0 dev 14 function 0: PLX Technology PEX 8112 PCIe-to-PCI Bridge (rev. 0xaa) [ 1.0000000] ppb0: PCI Express capability version 1 x1 @ 2.5GT/s [ 1.0000000] pci1 at ppb0 bus 2 [ 1.0000000] pci1: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.0000000] ixg0 at pci1 dev 0 function 0: Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 4.0.1-k [ 1.0000000] ixg0: clearing prefetchable bit [ 1.0000000] ixg0: device X550 [ 1.0000000] ixg0: NVM Image Version 1.86, PHY FW Revision 2.0b ID 0xb, NVM Map version 1.86, OEM NVM Image version 0.02, ETrackID 80000c66 [ 1.0000000] ixg0: interrupting at dec 6600 irq 35 [ 1.0000000] ixg0: Ethernet address b4:96:91:45:e9:ae [ 1.0000000] ixg0: PHY OUI 0x00aa00, model 0x0022, rev. 0 [ 1.0000000] ixg0: PCI Express Bus: Speed 2.5GT/s Width x1 [ 1.0000000] ixg0: PCI-Express bandwidth available for this card [ 1.0000000] is not sufficient for optimal performance. [ 1.0000000] ixg0: For optimal performance a x8 PCIE, or x4 PCIE Gen2 slot is required. [ 1.0000000] ixg0: feature cap 0x17a0 [ 1.0000000] ixg0: feature ena 0x1020 [ 1.0000000] wm0 at pci0 dev 15 function 0: Intel i82546GB 1000BASE-T Ethernet (rev. 0x03) [ 1.0000000] wm0: interrupting at dec 6600 irq 39 [ 1.0000000] wm0: 64-bit 33MHz PCI bus [ 1.0000000] wm0: 256 words (8 address bits) MicroWire EEPROM [ 1.0000000] wm0: Ethernet address 00:04:23:c3:96:ac [ 1.0000000] wm0: 0xc02 [ 1.0000000] makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 5 [ 1.0000000] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0000000] wm1 at pci0 dev 15 function 1: Intel i82546GB 1000BASE-T Ethernet (rev. 0x03) [ 1.0000000] wm1: interrupting at dec 6600 irq 38 [ 1.0000000] wm1: 64-bit 33MHz PCI bus [ 1.0000000] wm1: 256 words (8 address bits) MicroWire EEPROM [ 1.0000000] wm1: Ethernet address 00:04:23:c3:96:ad [ 1.0000000] wm1: 0xc02 [ 1.0000000] makphy1 at wm1 phy 1: Marvell 88E1011 Gigabit PHY, rev. 5 [ 1.0000000] makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0000000] siisata0 at pci0 dev 16 function 0: CMD Technology SiI3124 SATALink (rev. 0x02) [ 1.0000000] siisata0: interrupting at dec 6600 irq 43 [ 1.0000000] siisata0: SiI3124, 3.0Gb/s [ 1.0000000] siisata0: 64-bit 33MHz PCI [ 1.0000000] atabus2 at siisata0 channel 0 [ 1.0000000] atabus3 at siisata0 channel 1 [ 1.0000000] atabus4 at siisata0 channel 2 [ 1.0000000] atabus5 at siisata0 channel 3 [ 1.0000000] ppb1 at pci0 dev 17 function 0: Pericom Semiconductors PI7C9X111SL PCIe to PCI Reverse Bridge (rev. 0x02) [ 1.0000000] ppb1: PCI Express capability version 1 x1 @ 2.5GT/s [ 1.0000000] pci2 at ppb1 bus 3 [ 1.0000000] pci2: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.0000000] twa0 at pci2 dev 0 function 0: 3ware 9650SE series (rev. 0x01) [ 1.0000000] twa0: 64-bit DMA addressing active [ 1.0000000] twa0: interrupting at dec 6600 irq 47 [ 1.0000000] twa0: AEN 0x003D: INFO: Background verify paused: unit=0 [ 1.0000000] twa0: 2 ports, Firmware FE9X 4.10.00.007, BIOS BE9X 4.08.00.002 [ 1.0000000] twa0: Monitor BL9X 3.08.00.001, PCB Rev 032 , Achip 1.90 , Pchip 2.00 [ 1.0000000] twa0: port 1: WDC WDS500G1R0A-68A4W0 476940 MB [ 1.0000000] twa0: AMCC 9650SE-2LP DISK 4.1002A00D0B6D9E9F001667 [ 1.0000000] ld0 at twa0 unit 0 [ 1.0000000] ld0: 465 GB, 60786 cyl, 255 head, 63 sec, 512 bytes/sect x 976541696 sectors [ 1.0000000] isa0 at sio0 [ 1.0000000] lpt0 at isa0 port 0x3bc-0x3bf irq 7 [ 1.0000000] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 1-byte FIFO [ 1.0000000] com0: console [ 1.0000000] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 1-byte FIFO [ 1.0000000] pckbc0 at isa0 port 0x60-0x64 [ 1.0000000] attimer0 at isa0 port 0x40-0x43 [ 1.0000000] pcppi0 at isa0 port 0x61 [ 1.0000000] spkr0 at pcppi0: PC Speaker [ 1.0000000] wsbell at spkr0 not configured [ 1.0000000] midi0 at pcppi0: PC speaker [ 1.0000000] isabeep0 at pcppi0 [ 1.0000000] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 [ 1.0000000] mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock [ 1.0000000] attimer0: attached to pcppi0 [ 1.0000000] tsciic0 at tsc0 [ 1.0000000] iic0 at tsciic0: I2C bus [ 1.0000000] entropy: WARNING: extracting entropy too early [ 1.0000000] timecounter: Timecounter "PCC" frequency 462370976 Hz quality 1000 [ 1.0074840] timecounter: Timecounter "clockinterrupt" frequency 1024 Hz quality 0 [ 1.2460209] aes: BearSSL aes_ct [ 1.2818546] chacha: Portable C ChaCha [ 1.3261001] adiantum: self-test passed [ 1.3710208] aes_ccm: self-test passed [ 1.4139878] blake2s: self-test passed [ 4.4588763] stray isa irq 14 [ 4.4914631] wd0 at atabus0 drive 0 [ 4.5321185] wd0: [ 4.5809068] wd0: drive supports 1-sector PIO transfers, LBA48 addressing [ 4.6609879] wd0: 111 GB, 232594 cyl, 16 head, 63 sec, 512 bytes/sect x 234455040 sectors [ 4.7586827] wd0: 32-bit data port [ 4.7972372] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) [ 4.8898016] wd0(aceride0:0:0): using PIO mode 4 [ 6.4031925] crypto: assign driver 0, flags 2 [ 6.4529035] crypto: driver 0 registers alg 1 flags 0 maxoplen 0 [ 6.5236237] crypto: driver 0 registers alg 2 flags 0 maxoplen 0 [ 6.5943482] crypto: driver 0 registers alg 3 flags 0 maxoplen 0 [ 6.6650718] crypto: driver 0 registers alg 4 flags 0 maxoplen 0 [ 6.7357947] crypto: driver 0 registers alg 5 flags 0 maxoplen 0 [ 6.8065203] crypto: driver 0 registers alg 26 flags 0 maxoplen 0 [ 6.8782837] crypto: driver 0 registers alg 27 flags 0 maxoplen 0 [ 6.9500457] crypto: driver 0 registers alg 29 flags 0 maxoplen 0 [ 7.0218101] crypto: driver 0 registers alg 33 flags 0 maxoplen 0 [ 7.0935749] crypto: driver 0 registers alg 17 flags 0 maxoplen 0 [ 7.1653381] crypto: driver 0 registers alg 6 flags 0 maxoplen 0 [ 7.2360607] crypto: driver 0 registers alg 19 flags 0 maxoplen 0 [ 7.3078266] crypto: driver 0 registers alg 7 flags 0 maxoplen 0 [ 7.3785490] crypto: driver 0 registers alg 20 flags 0 maxoplen 0 [ 7.4503124] crypto: driver 0 registers alg 15 flags 0 maxoplen 0 [ 7.5220778] crypto: driver 0 registers alg 24 flags 0 maxoplen 0 [ 7.5938411] crypto: driver 0 registers alg 25 flags 0 maxoplen 0 [ 7.6656056] crypto: driver 0 registers alg 8 flags 0 maxoplen 0 [ 7.7363275] crypto: driver 0 registers alg 21 flags 0 maxoplen 0 [ 7.8080921] crypto: driver 0 registers alg 16 flags 0 maxoplen 0 [ 7.8798554] crypto: driver 0 registers alg 9 flags 0 maxoplen 0 [ 7.9505807] crypto: driver 0 registers alg 10 flags 0 maxoplen 0 [ 8.0223426] crypto: driver 0 registers alg 13 flags 0 maxoplen 0 [ 8.0941082] crypto: driver 0 registers alg 14 flags 0 maxoplen 0 [ 8.1658721] crypto: driver 0 registers alg 28 flags 0 maxoplen 0 [ 8.2376358] crypto: driver 0 registers alg 30 flags 0 maxoplen 0 [ 8.3093996] crypto: driver 0 registers alg 31 flags 0 maxoplen 0 [ 8.3811630] crypto: driver 0 registers alg 32 flags 0 maxoplen 0 [ 8.4529264] crypto: driver 0 registers alg 11 flags 0 maxoplen 0 [ 8.5246909] crypto: driver 0 registers alg 18 flags 0 maxoplen 0 [ 8.5964540] crypto: driver 0 registers alg 23 flags 0 maxoplen 0 [ 8.6682171] crypto: driver 0 registers alg 22 flags 0 maxoplen 0 [ 8.7399825] cgd: self-test aes-xts-256 [ 8.7847066] cgd: self-test aes-xts-512 [ 8.8294267] cgd: self-test aes-cbc-128 [ 8.8741500] cgd: self-test aes-cbc-256 [ 8.9188726] cgd: self-test 3des-cbc-192 [ 8.9646930] cgd: self-test blowfish-cbc-448 [ 9.0145552] cgd: self-test aes-cbc-128 (encblkno8) [ 9.0717595] cgd: self-tests passed [ 9.1404740] root on ld0a dumps on ld0b [ 9.1912554] root file system type: ffs [ 9.2351982] kern.module.path=/stand/alpha/9.99.82/modules Enter pathname of shell or RETURN for /bin/sh: We recommend that you create a non-root account and use su(1) for root access. # exit Mon Jul 5 10:03:29 JST 2021 Starting root file system check: /dev/rld0a: file system is clean; not checking swapctl: setting dump device to /dev/ld0b swapctl: adding /dev/ld0b as swap device at priority 0 Starting [ 12.6463058] Reader / writer lock error: rw_vector_enter,303: assertion failed: !cpu_intr_p() [ 12.6463058] lock address : 0xfffffc0001673300 [ 12.6463058] current cpu : 0 [ 12.6463058] current lwp : 0xfffffc007fe46040 [ 12.6463058] owner/count : 000000000000000000 flags : 000000000000000000 [ 12.6463058] panic: lock error: Reader / writer lock: rw_vector_enter,303: assertion failed: !cpu_intr_p(): lock 0xfffffc0001673300 cpu 0 lwp 0xfffffc007fe46040 [ 12.6463058] cpu0: Begin traceback... [ 12.6463058] alpha trace requires known PC =eject= [ 12.6463058] cpu0: End traceback... Stopped in pid 0.2 (system) at netbsd:cpu_Debugger+0x4: ret zero,(ra ) db{0}> bt cpu_Debugger() at netbsd:cpu_Debugger+0x4 db_panic() at netbsd:db_panic+0xc8 vpanic() at netbsd:vpanic+0x108 panic() at netbsd:panic+0x58 lockdebug_abort() at netbsd:lockdebug_abort+0x12c rw_abort() at netbsd:rw_abort+0x44 rw_enter() at netbsd:rw_enter+0x4c8 pmap_emulate_reference() at netbsd:pmap_emulate_reference+0xf0 trap() at netbsd:trap+0x490 XentMM() at netbsd:XentMM+0x20 --- memory management fault (from ipl 4) --- tsp_io_read_multi_4() at netbsd:tsp_io_read_multi_4+0x48 wdc_datain_pio() at netbsd:wdc_datain_pio+0x84 wdc_ata_bio_intr() at netbsd:wdc_ata_bio_intr+0x29c wdcintr() at netbsd:wdcintr+0x104 pciide_compat_intr() at netbsd:pciide_compat_intr+0x24 alpha_shared_intr_wrapper() at netbsd:alpha_shared_intr_wrapper+0x38 alpha_shared_intr_dispatch() at netbsd:alpha_shared_intr_dispatch+0x5c sio_iointr() at netbsd:sio_iointr+0x44 interrupt() at netbsd:interrupt+0x258 XentInt() at netbsd:XentInt+0x1c --- interrupt (from ipl 0) --- idle_loop() at netbsd:idle_loop+0x18c --- kernel thread backstop --- db{0}>