Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.99.12 (SHEEVAPLUG) #0: Sat Oct 13 21:38:26 JST 2012
	msaitoh@tap.execsw.org:/var/sources/NetBSD-current/src/sys/arch/evbarm/compile/obj/SHEEVAPLUG
total memory = 512 MB
avail memory = 497 MB
timecounter: Timecounters tick every 10.000 msec
cprng kernel: WARNING insufficient entropy at creation.
mainbus0 (root)
cpu0 at mainbus0 core 0: Sheeva 88SV131 rev 1 (ARM9E-S core)
cpu0: DC enabled IC enabled WB enabled EABT branch prediction enabled
cpu0: 16KB/32B 4-way L1 Instruction cache
cpu0: 16KB/32B 4-way write-back-locking-C L1 Data cache
mvsoc0 at mainbus0: Marvell 88F6281 Rev. A0  Kirkwood
mvsoc0: CPU Clock 1200.000 MHz  SysClock 400.000 MHz  TClock 200.000 MHz
mvsoctmr0 at mvsoc0 unit 0 offset 0x20300-0x203ff: Marvell SoC Timer
mvsocgpp at mvsoc0 unit 0 not configured
mvsocrtc0 at mvsoc0 unit 0 offset 0x10300-0x10317: Marvell SoC Real Time Clock
com0 at mvsoc0 unit 0 offset 0x12000-0x1201f irq 33: ns16550a, working fifo
com0: console
com1 at mvsoc0 unit 1 offset 0x12100-0x1211f irq 34: ns16550a, working fifo
ehci0 at mvsoc0 unit 0 offset 0x50000-0x51fff irq 19: Marvell USB 2.0 Interface
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
gtidmac0 at mvsoc0 unit 0 offset 0x60000-0x60fff: Marvell IDMA Controller/XOR Engine
gtidmac0: XOR Engine 4 channels, intr 5...8
gttwsi0 at mvsoc0 unit 0 offset 0x11000-0x110ff irq 29: Marvell TWSI controller
iic0 at gttwsi0: I2C bus
mvcesa0 at mvsoc0 unit 0 offset 0x30000-0x3ffff irq 22: Marvell Cryptographic Engines and Security Accelerator
mvgbec0 at mvsoc0 unit 0 offset 0x70000-0x73fff: Marvell Gigabit Ethernet Controller
mvgbe0 at mvgbec0 port 0 irq 11
mvgbe0: Ethernet address 00:50:43:01:d1:88
makphy0 at mvgbe0 phy 0: Marvell 88E1116R Gigabit PHY, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
mvgbec1 at mvsoc0 unit 1 offset 0x74000-0x77fff: Marvell Gigabit Ethernet Controller
mvgbe at mvgbec1 port 0 not configured
mvpex at mvsoc0 unit 0 not configured
mvsata at mvsoc0 unit 0 not configured
mvsdio0 at mvsoc0 unit 0 offset 0x90000-0x9ffff irq 28: Marvell Secure Digital Input/Output Interface
sdmmc0 at mvsdio0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mvsoctmr0" frequency 200000000 Hz quality 100
uhub0 at usb0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: BUFFALO USB Flash Disk, rev 2.00/40.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <BUFFALO, USB Flash Disk, 4000> disk removable
sd0: 7648 MB, 15744 cyl, 16 head, 63 sec, 512 bytes/sect x 15663104 sectors
cprng sysctl: WARNING insufficient entropy at creation.
boot device: <unknown>
root device: mvb^H ^Hgbe0
dump device: 
file system (default generic): nfs
root on mvgbe0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 192.168.1.5
nfs_boot: my_domain=execsw.org
nfs_boot: my_addr=192.168.1.30
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.1.1
root on 192.168.1.5:/var/diskless/evbarm-current/root
root time: 0x5079a196
init path (default /sbin/init): 
init: copying out path `/sbin/init' 11
fixup: pm 0xc2cf28a8, va 0xbfffe000, ftype 2 - nothing to do!
fixup: l2 0xc29bedc8, l2b 0xc29bee80, ptep 0xc29babf8, pl1pd 0xc04a6ffc
fixup: pte 0x1fbd7ffe, l1pd 0x1ffd2831, last code 0x17
cprng 150407d4: WARNING insufficient entropy at creation.