Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.0_RC2 (OPENRD) #2: Sat Oct 13 19:50:59 JST 2012 msaitoh@tap.execsw.org:/var/sources/2netbsd-6/src/sys/arch/evbarm/compile/OPENRD total memory = 512 MB avail memory = 497 MB timecounter: Timecounters tick every 10.000 msec cprng kernel: WARNING insufficient entropy at creation. mainbus0 (root) cpu0 at mainbus0: Sheeva 88SV131 rev 1 (ARM9E-S core) cpu0: DC enabled IC enabled WB enabled EABT branch prediction enabled cpu0: 16KB/32B 4-way Instruction cache cpu0: 16KB/32B 4-way write-back-locking-C Data cache mvsoc0 at mainbus0: Marvell 88F6281 Rev. A0 Kirkwood mvsoc0: CPU Clock 1200.000 MHz SysClock 400.000 MHz TClock 200.000 MHz mvsoctmr0 at mvsoc0 unit 0 offset 0x20300-0x203ff: Marvell SoC Timer mvsocgpp at mvsoc0 unit 0 not configured mvsocrtc0 at mvsoc0 unit 0 offset 0x10300-0x10317: Marvell SoC Real Time Clock com0 at mvsoc0 unit 0 offset 0x12000-0x1201f irq 33: ns16550a, working fifo com0: console com1 at mvsoc0 unit 1 offset 0x12100-0x1211f irq 34: ns16550a, working fifo ehci0 at mvsoc0 unit 0 offset 0x50000-0x51fff irq 19: Marvell USB 2.0 Interface ehci0: EHCI version 1.0 usb0 at ehci0: USB revision 2.0 gttwsi0 at mvsoc0 unit 0 offset 0x11000-0x11fff irq 29: Marvell TWSI controller iic0 at gttwsi0: I2C bus mvcesa at mvsoc0 unit 0 not configured mvgbec0 at mvsoc0 unit 0 offset 0x70000-0x73fff: Marvell Gigabit Ethernet Controller mvgbe0 at mvgbec0 port 0 irq 11 mvgbe0: Ethernet address 00:50:43:01:a2:c6 makphy0 at mvgbe0 phy 8: Marvell 88E1116R Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto mvgbec1 at mvsoc0 unit 1 offset 0x74000-0x77fff: Marvell Gigabit Ethernet Controller mvgbe1 at mvgbec1 port 0 irq 15 mvgbe1: Ethernet address 00:50:43:01:a2:c7 makphy1 at mvgbe1 phy 24: Marvell 88E1116R Gigabit PHY, rev. 0 makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto mvpex at mvsoc0 unit 0 not configured mvsata0 at mvsoc0 unit 0 offset 0x80000-0x87fff irq 21: Marvell Serial-ATA Host Controller (SATAHC) mvsata0: GenIIe, 1hc, 2port/hc atabus0 at mvsata0 channel 0 atabus1 at mvsata0 channel 1 mvsdio at mvsoc0 unit 0 not configured timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "mvsoctmr0" frequency 200000000 Hz quality 100 uhub0 at usb0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub0: 1 port with 1 removable, self powered mvsata0 port 1: device present, speed: 1.5Gb/s wd0 at atabus1 drive 0 wd0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(mvsata0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) uhub1 at uhub0 port 1: Standard Microsystems product 0x2517, class 9/0, rev 2.00/0.01, addr 2 uhub1: multiple transaction translators uhub1: 7 ports with 7 removable, self powered umass0 at uhub1 port 5 configuration 1 interface 0 umass0: BUFFALO USB Flash Disk, rev 2.00/1.00, addr 3 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: disk removable sd0: 124 MB, 496 cyl, 16 head, 32 sec, 512 bytes/sect x 253952 sectors cprng sysctl: WARNING insufficient entropy at creation. boot device: root on wd0a dumps on wd0b init: copying out path `/sbin/init' 11