Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 5.99.24 (SCHIZO) #354: Wed Mar 10 00:35:12 PST 2010 mrg@space-bird.eterna23.net:/var/obj/sparc64/usr/src/sys/arch/sparc64/compile/SCHIZO total memory = 2048 MB avail memory = 1997 MB timecounter: Timecounters tick every 10.000 msec mainbus0 (root): SUNW,Sun-Blade-2500 (Sun Blade 2500): hostid 834d06bc cpu0 at mainbus0: SUNW,UltraSPARC-IIIi @ 1280 MHz, UPA id 0 cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l) cpu1 at mainbus0: SUNW,UltraSPARC-IIIi @ 1280 MHz, UPA id 1 cpu1: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l) memory-controller at mainbus0 not configured memory-controller at mainbus0 not configured schizo0 at mainbus0: addr 4000e600000: "Tomatillo", version 4, ign 700, bus A 0 to 1 schizo0: no streaming buffers schizo0: DVMA map: c0000000 to dfffffff IOTSB: 2384000 to 2403fff pci0 at schizo0 pci0: i/o space, memory space enabled bge0 at pci0 dev 3 function 0: Broadcom BCM5703 Gigabit Ethernet bge0: interrupting at ivec 371c bge0: ASIC BCM5702/5703 A2 (0x1002), Ethernet address 00:03:ba:4d:06:bc brgphy0 at bge0 phy 1: BCM5703 1000BASE-T media interface, rev. 2 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb0 at pci0 dev 2 function 0: Intel S21152BA,S21154AE/BE PCI-PCI Bridge (rev. 0x00) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled cas0 at pci1 dev 0 function 0: Sun Microsystems Cassini Gigabit Ethernet (rev. 0x11) cas0: interrupting at ivec 3700 cas0: Ethernet address 00:03:ba:36:79:d7 brgphy1 at cas0 phy 1: BCM5401 1000BASE-T media interface, rev. 3 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppm at mainbus0 not configured schizo1 at mainbus0: addr 4000ef00000: "Tomatillo", version 4, ign 740, bus B 0 to 1 schizo1: no streaming buffers schizo1: DVMA map: c0000000 to dfffffff IOTSB: 2870000 to 28effff pci2 at schizo1 pci2: i/o space, memory space enabled esiop0 at pci2 dev 4 function 0: Symbios Logic 53c1010-66 (ultra3-wide scsi) esiop0: using on-board RAM esiop0: interrupting at ivec 1f69 esiop0: alloc new tag DSA table at PHY addr 0xc0000000 scsibus0 at esiop0: 16 targets, 8 luns per target esiop1 at pci2 dev 4 function 1: Symbios Logic 53c1010-66 (ultra3-wide scsi) esiop1: using on-board RAM esiop1: interrupting at ivec 1f68 esiop1: alloc new tag DSA table at PHY addr 0xc0002000 scsibus1 at esiop1: 16 targets, 8 luns per target ppb1 at pci2 dev 2 function 0: Digital Equipment DC21153 PCI-PCI Bridge (rev. 0x04) pci3 at ppb1 bus 1 pci3: i/o space, memory space enabled Sun Microsystems PCIO Ebus2 (miscellaneous bridge, revision 0x01) at pci3 dev 0 function 0 not configured hme0 at pci3 dev 0 function 1: Sun Happy Meal Ethernet, rev. 1 hme0: interrupting at ivec 3745 hme0: Ethernet address 08:00:20:aa:da:40 qsphy0 at hme0 phy 1: QS6612 10/100 media interface, rev. 1 qsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Sun Microsystems PCIO Ebus2 (miscellaneous bridge, revision 0x01) at pci3 dev 1 function 0 not configured hme1 at pci3 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1 hme1: interrupting at ivec 3746 hme1: Ethernet address 08:00:20:aa:da:41 qsphy1 at hme1 phy 1: QS6612 10/100 media interface, rev. 1 qsphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Sun Microsystems PCIO Ebus2 (miscellaneous bridge, revision 0x01) at pci3 dev 2 function 0 not configured hme2 at pci3 dev 2 function 1: Sun Happy Meal Ethernet, rev. 1 hme2: interrupting at ivec 3747 hme2: Ethernet address 08:00:20:aa:da:42 qsphy2 at hme2 phy 1: QS6612 10/100 media interface, rev. 1 qsphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Sun Microsystems PCIO Ebus2 (miscellaneous bridge, revision 0x01) at pci3 dev 3 function 0 not configured hme3 at pci3 dev 3 function 1: Sun Happy Meal Ethernet, rev. 1 hme3: interrupting at ivec 3744 hme3: Ethernet address 08:00:20:aa:da:43 qsphy3 at hme3 phy 1: QS6612 10/100 media interface, rev. 1 qsphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto schizo2 at mainbus0: addr 4000f600000: "Tomatillo", version 4, ign 780, bus A 0 to 1 schizo2: no streaming buffers schizo2: DVMA map: c0000000 to dfffffff IOTSB: 2a8c000 to 2b0bfff pci4 at schizo2 pci4: i/o space, memory space enabled ebus0 at pci4 dev 7 function 0 ebus0: Acer Labs M1533 PCI-ISA Bridge, revision 0x00 flashprom at ebus0 addr 0-fffff not configured rtc0 at ebus0 addr 70-71: mc146818 compatible time-of-day clock: m5819p pcfiic0 at ebus0 addr 320-321 ipl 46 iic0 at pcfiic0: I2C bus i2c-bridge at iic0 addr 0x09 not configured gpio at iic0 addr 0x18 not configured hardware-monitor at iic0 addr 0x2c not configured hardware-monitor at iic0 addr 0x2e not configured gpio at iic0 addr 0x37 not configured gpio at iic0 addr 0x4e not configured audio-card-fru-prom at iic0 addr 0x50 not configured motherboard-fru-prom at iic0 addr 0x51 not configured scsi-backplane-fru-prom at iic0 addr 0x54 not configured dimm-spd at iic0 addr 0x5b not configured dimm-spd at iic0 addr 0x5c not configured dimm-spd at iic0 addr 0x5d not configured dimm-spd at iic0 addr 0x5e not configured clock-generator at iic0 addr 0x69 not configured power at ebus0 addr 800-82f ipl 32 not configured com0 at ebus0 addr 3f8-3ff ipl 44: ns16550a, working fifo com1 at ebus0 addr 2e8-2ef ipl 44: ns16550a, working fifo dma at ebus0 addr 0-ffff not configured alipm0 at pci4 dev 6 function 0: 223KHz clock iic1 at alipm0: I2C bus beep at iic1 addr 0x59 not configured ppm at iic1 addr 0x59 not configured autri0 at pci4 dev 8 function 0: Acer Labs M5451 AC-Link Controller Audio Device (rev. 0x02) autri0: interrupting at ivec 7a4 autri0: ac97: Analog Devices AD1881A codec; headphone, Analog Devices Phat Stereo audio0 at autri0: full duplex, playback, capture, mmap, independent midi0 at autri0: 4DWAVE MIDI UART ohci0 at pci4 dev 10 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) ohci0: interrupting at ivec 7a7 ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 ohci1 at pci4 dev 11 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) ohci1: interrupting at ivec 7a6 ohci1: OHCI version 1.0, legacy support usb1 at ohci1: USB revision 1.0 aceride0 at pci4 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc4) aceride0: bus-master DMA support present aceride0: primary channel configured to native-PCI mode aceride0: using ivec 1f98 for native-PCI interrupt atabus0 at aceride0 channel 0 aceride0: secondary channel configured to native-PCI mode atabus1 at aceride0 channel 1 machfb0 at pci4 dev 2 function 0membase: 0 fbpa: 7ff03000000 : ATI Technologies Rage XL (rev. 0x27) machfb0: 16 MB aperture at 0x03000000, 4 KB registers at 0x00102000 machfb0: memctl 10a57a3b machfb0: ref_freq=29.498MHz machfb0: 8188 KB SGRAM 114.992 MHz, maximum RAMDAC clock 230 MHz gen_cntl: 03002200 mach64_get_mode: 1280 5440 5552 1688 1024 1025 1060 1066 machfb0: initial resolution 1280x1024 at 8 bpp machfb0: attached to /dev/fb0 wsdisplay0 at machfb0 kbdmux 1: console (default, sun emulation) wsmux1: connecting to wsdisplay0 wsdisplay0: screen 1-3 added (default, sun emulation) ppb2 at pci4 dev 4 function 0: Texas Instruments product 0xac23 (rev. 0x02) pci5 at ppb2 bus 1 pci5: i/o space, memory space enabled ohci2 at pci5 dev 8 function 0: NEC USB Host Controller (rev. 0x43) ohci2: interrupting at ivec 794 ohci2: OHCI version 1.0 usb2 at ohci2: USB revision 1.0 ohci3 at pci5 dev 8 function 1: NEC USB Host Controller (rev. 0x43) ohci3: interrupting at ivec 795 ohci3: OHCI version 1.0 usb3 at ohci3: USB revision 1.0 ehci0 at pci5 dev 8 function 2: NEC USB Host Controller (rev. 0x04) ehci0: interrupting at ivec 796 ehci0: EHCI version 1.0 ehci0: companion controllers, 3 ports each: ohci2 ohci3 usb4 at ehci0: USB revision 2.0 fwohci0 at pci5 dev 11 function 0: Texas Instruments TSB43AA23 IEEE 1394 Host Controller (rev. 0x00) fwohci0: interrupting at ivec 797 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:05:16:00:00:40:31:56 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. ieee1394if0 at fwohci0: IEEE1394 bus fwip0 at ieee1394if0: IP over IEEE1394 fwohci0: Initiate bus reset ppm at mainbus0 not configured schizo3 at mainbus0: addr 4000ff00000: "Tomatillo", version 4, ign 7c0, bus B 0 to 0 schizo3: no streaming buffers schizo3: DVMA map: c0000000 to dfffffff IOTSB: 2fa2000 to 3021fff pci6 at schizo3 pci6: i/o space, memory space enabled i2c at mainbus0 not configured pcons at mainbus0 not configured fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) ieee1394if0: bus manager 0 (me) timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "tick-counter" frequency 1280000000 Hz quality 100 No counter-timer -- using %tick at 1280MHz as system clock. Using %tick -- intr in 12800000 cycles Using %tick -- intr in 12800000 cycles scsibus0: waiting 2 seconds for devices to settle... scsibus1: waiting 2 seconds for devices to settle... atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) uhub0 at usb0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 3 ports with 3 removable, self powered uhub3 at usb3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhub4 at usb4: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 5 ports with 5 removable, self powered WARNING: negative runtime; monotonic clock has gone backwards uhidev0 at uhub0 port 1 configuration 1 interface 0 uhidev0: vendor 0x0461 USB Optical Mouse, rev 2.00/2.00, addr 2, iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir wsmouse0 at ums0 mux 0 uhidev1 at uhub1 port 2 configuration 1 interface 0 uhidev1: BTC USB Multimedia Keyboard, rev 1.10/1.10, addr 2, iclass 3/1 ukbd0 at uhidev1: 8 modifier keys, 6 key codes esiop0: alloc newcdb at PHY addr 0xc019c000 sd0 at scsibus0 target 0 lun 0: disk fixed sd0: 17274 MB, 7508 cyl, 19 head, 248 sec, 512 bytes/sect x 35378533 sectors sd0: sync (12.50ns offset 62), 16-bit (160.000MB/s) transfers, tagged queueing wskbd1 at ukbd0: console keyboard, using wsdisplay0 uhidev2 at uhub1 port 2 configuration 1 interface 1 uhidev2: BTC USB Multimedia Keyboard, rev 1.10/1.10, addr 2, iclass 3/0 uhidev2: 3 report ids uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0 uhid1 at uhidev2 reportid 2: input=3, output=0, feature=0 uhid2 at uhidev2 reportid 3: input=3, output=0, feature=4 esiop1: alloc newcdb at PHY addr 0xc019e000 Kernelized RAIDframe activated Component on: sd0a: 26858400 Row: 0 Column: 0 Num Rows: 1 Num Columns: 2 Version: 2 Serial Number: -2007590239 Mod Counter: 1843115886 Clean: Yes Status: 0 sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1 RAID Level: 1 blocksize: 512 numBlocks: 26858240 Autoconfig: Yes Contains root partition: Yes Last configured as: raid0 Found: sd0a at 0 RAID autoconfigure Configuring raid0: Starting autoconfiguration of RAID set... Looking for 0 in autoconfig Found: sd0a at 0 Looking for 1 in autoconfig raid0: allocating 20 buffers of 65536 bytes. raid0: RAID Level 1 raid0: Components: /dev/sd0a component1[**FAILED**] raid0: Total Sectors: 26858240 (13114 MB) root on raid0a dumps on raid0b mountroot: trying smbfs... mountroot: trying nfs... mountroot: trying msdos... mountroot: trying lfs... mountroot: trying ffs... root file system type: ffs init: copying out path `/sbin/init' 11