Probing system devices screen not found. keyboard not found. Keyboard not present. Using ttya for input and output. Probing system devices Sun Blade 2000/1000 (2 X UltraSPARC-III+) , No Keyboard Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.16.4, 8192 MB memory installed, Serial #56326727. Ethernet address 0:3:ba:5b:7a:47, Host ID: 835b7a47. Rebooting with command: boot onetbsd Boot device: /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@2,0 File and args: onetbsd NetBSD IEEE 1275 Multi-FS Bootblock Version $NetBSD: bootblk.fth,v 1.11 2010/02/17 15:49:19 eeh Exp $ >> NetBSD/sparc64 OpenFirmware Boot, Revision 1.15 =0xc9bf30 Loading onetbsd: 9963616+638704+436192 [634392+415488]=0xe07428 Loaded initial symtab at 0x1d06f10, strtab at 0x1da1d28, # entries 26402 consinit() stdin node = f0083ea0 stdout package = f0083ea0 buffer @ 0x2005cb8 console is /pci@8,700000/ebus@5/serial@1,400000:a Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 7.99.26 (_makimura_) #0: Thu Mar 24 01:48:07 PDT 2016 mrg@space-bird.eterna23.net:/var/obj/sparc64/usr/src7/sys/arch/sparc64/compile/_makimura_ total memory = 8192 MB avail memory = 8026 MB mainbus0 (root): SUNW,Sun-Blade-1000 (Sun Blade 2000/1000): hostid 835b7a47 cpu0 at mainbus0: SUNW,UltraSPARC-III+ @ 1200 MHz, CPU id 0 cpu0: manuf 3e, impl 15, mask b0 cpu0: system tick frequency 5 MHz cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 8192K external (512 b/l) cpu1 at mainbus0: SUNW,UltraSPARC-III+ @ 1200 MHz, CPU id 1 cpu1: manuf 3e, impl 15, mask b0 cpu1: system tick frequency 5 MHz cpu1: 32K instruction (32 b/l), 64K data (32 b/l), 8192K external (512 b/l) memory-controller at mainbus0 not configured memory-controller at mainbus0 not configured schizo0 at mainbus0: addr 40004700000: Schizo, version 0, ign 200, bus B 0 to 1 schizo0: pci0 at schizo0 ebus0 at pci0 dev 5 function 0 ebus0: Sun Microsystems PCIO Ebus2 (US III), revision 0x01 flashprom at ebus0 addr 0-1fffff not configured pcfiic0 at ebus0 addr 2e-2f, 2d-2d ipl 23: iic mux present iic0 at pcfiic0: I2C bus seeprom0 at iic0 addr 0x50: nvram: size 8192 seeprom1 at iic0 addr 0xd0: dimm-fru: size 8192 seeprom2 at iic0 addr 0xd1: dimm-fru: size 8192 seeprom3 at iic0 addr 0xd2: dimm-fru: size 8192 seeprom4 at iic0 addr 0xd3: dimm-fru: size 8192 seeprom5 at iic0 addr 0xd4: dimm-fru: size 8192 seeprom6 at iic0 addr 0xd5: dimm-fru: size 8192 seeprom7 at iic0 addr 0xd6: dimm-fru: size 8192 seeprom8 at iic0 addr 0xd7: dimm-fru: size 8192 bbc at ebus0 addr 0-fffff not configured ppm at ebus0 addr e-28, 728000-728003, 30002e-30002f, 300600-300607 not configured pcfiic1 at ebus0 addr 30-31 ipl 23 iic1 at pcfiic1: I2C bus seeprom9 at iic1 addr 0x50: cpu-fru: size 8192 admtemp0 at iic1 addr 0x18: MAX1617A temperature sensor: id. 0x4d, rev. 0x01 seeprom10 at iic1 addr 0x51: cpu-fru: size 8192 admtemp1 at iic1 addr 0x4c: MAX1617A temperature sensor: id. 0x4d, rev. 0x01 tda0 at iic1 addr 0x24: fan-control card-reader at iic1 addr 0x20 not configured seeprom11 at iic1 addr 0x54: motherboard-fru: size 8192 i2c-bridge at iic1 addr 0x30 not configured beep at ebus0 addr 32-37 not configured audiocs0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ipl 20 ipl 21: CS4231 audio0 at audiocs0: full duplex, playback, capture rtc0 at ebus0 addr 300070-300071 ipl 24: mc146818 compatible time-of-day clock: ds1287 gpio at ebus0 addr 300600-300607 not configured pmc at ebus0 addr 300700-300701 not configured floppy at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 25 not configured lpt0 at ebus0 addr 300278-300287, 30002e-30002f, 700000-70000f ipl 1c sab0 at ebus0 addr 400000-40007f ipl 22: rev 3.2 sabtty0 at sab0 port 0: console i/o sabtty1 at sab0 port 1 gem0 at pci0 dev 5 function 1: Sun Microsystems ERI Ethernet (rev. 0x01) gem0: interrupting at ivec 321d ukphy0 at gem0 phy 1: OUI 0x0006b8, model 0x000c, rev. 1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto gem0: Ethernet address 00:03:ba:5b:7a:47, 2KB RX fifo, 2KB TX fifo fwohci0 at pci0 dev 5 function 2: Sun Microsystems FireWire Controller (rev. 0x01) fwohci0: interrupting at ivec 21e fwohci0: OHCI version 1.0 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:03:ba:ff:fe:5b:7a:47 fwohci0: Phy 1394a available S400, 4 ports. fwohci0: Link S400, max_rec 2048 bytes. ieee1394if0 at fwohci0: IEEE1394 bus fwip0 at ieee1394if0: IP over IEEE1394 fwohci0: Initiate bus reset ohci0 at pci0 dev 5 function 3: Sun Microsystems USB Controller (rev. 0x01) csr: 02800046 ohci0: interrupting at ivec 21f ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 esiop0 at pci0 dev 6 function 0: Symbios Logic 53c875 (ultra-wide scsi) esiop0: using on-board RAM esiop0: interrupting at ivec 1a18 scsibus0 at esiop0: 16 targets, 8 luns per target esiop1 at pci0 dev 6 function 1: Symbios Logic 53c875 (ultra-wide scsi) esiop1: using on-board RAM esiop1: interrupting at ivec 1a19 scsibus1 at esiop1: 16 targets, 8 luns per target ppb0 at pci0 dev 2 function 0: Intel S21152BA,S21154AE/BE PCI-PCI Bridge (rev. 0x00) pci1 at ppb0 bus 1 cas0 at pci1 dev 0 function 0: Sun Microsystems Cassini Gigabit Ethernet (rev. 0x20) cas0: interrupting at ivec 3210 cas0: Ethernet address 00:03:ba:5b:7a:47 brgphy0 at cas0 phy 1: BCM5401 1000BASE-T media interface, rev. 3 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto schizo1 at mainbus0: addr 40004600000: Schizo, version 0, ign 200, bus A 0 to 0 schizo1: pci2 at schizo1 isp0 at pci2 dev 4 function 0: QLogic FC-AL and Fabric HBA isp0: interrupting at ivec 204 isp0: invalid NVRAM header isp0: invalid NVRAM header isp0: bad frame length (0) from NVRAM- using 1024 isp0: bad execution throttle of 0- using 16 upa0 at mainbus0 ppm at mainbus0 not configured pcons at mainbus0 not configured fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) ieee1394if0: bus manager 0 cannot get 1024 Hz clock; using 100 Hz No counter-timer -- using %stick at 5MHz as system clock. scsibus0: waiting 2 seconds for devices to settle... scsibus1: waiting 2 seconds for devices to settle... scsibus2 at isp0: 256 targets, 8 luns per target uhub0 at usb0: Sun Microsystems OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 scsibus2: waiting 2 seconds for devices to settle... cd0 at scsibus0 target 6 lun 0: cdrom removable cd0: sync (50.00ns offset 16), 8-bit (20.000MB/s) transfers sd0 at scsibus2 target 0 lun 0: disk fixed sd0: 70007 MB, 14089 cyl, 24 head, 424 sec, 512 bytes/sect x 143374738 sectors sd1 at scsibus2 target 1 lun 0: disk fixed sd1: 70007 MB, 14089 cyl, 24 head, 424 sec, 512 bytes/sect x 143374738 sectors Component on: sd0a: 126182400 Row: 0 Column: 1 Num Rows: 1 Num Columns: 2 Version: 2 Serial Number: 21389472 Mod Counter: 26691221 Clean: Yes Status: 0 sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1 RAID Level: 1 blocksize: 512 numBlocks: 126182272 Autoconfig: Yes Root partition: Soft Last configured as: raid0 Component on: sd0b: 17166912 Row: 0 Column: 1 Num Rows: 1 Num Columns: 2 Version: 2 Serial Number: 89742318 Mod Counter: 858 Clean: Yes Status: 0 sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1 RAID Level: 1 blocksize: 512 numBlocks: 17166848 Autoconfig: Yes Root partition: No Last configured as: raid1 Component on: sd1a: 126182400 Row: 0 Column: 0 Num Rows: 1 Num Columns: 2 Version: 2 Serial Number: 21389472 Mod Counter: 26691221 Clean: Yes Status: 0 sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1 RAID Level: 1 blocksize: 512 numBlocks: 126182272 Autoconfig: Yes Root partition: Soft Last configured as: raid0 Component on: sd1b: 17166912 Row: 0 Column: 0 Num Rows: 1 Num Columns: 2 Version: 2 Serial Number: 89742318 Mod Counter: 858 Clean: Yes Status: 0 sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1 RAID Level: 1 blocksize: 512 numBlocks: 17166848 Autoconfig: Yes Root partition: No Last configured as: raid1 Found: sd1a at 0 Found: sd0a at 1 RAID autoconfigure Configuring raid0: Starting autoconfiguration of RAID set... Looking for 0 in autoconfig Found: sd1a at 0 Looking for 1 in autoconfig Found: sd0a at 1 raid0: allocating 20 buffers of 65536 bytes. raid0: RAID Level 1 raid0: Components: /dev/sd1a /dev/sd0a raid0: Total Sectors: 126182272 (61612 MB) Found: sd1b at 0 Found: sd0b at 1 RAID autoconfigure Configuring raid1: Starting autoconfiguration of RAID set... Looking for 0 in autoconfig Found: sd1b at 0 Looking for 1 in autoconfig Found: sd0b at 1 raid1: allocating 20 buffers of 65536 bytes. raid1: RAID Level 1 raid1: Components: /dev/sd1b /dev/sd0b raid1: Total Sectors: 17166848 (8382 MB) root on raid0a dumps on raid0b mountroot: trying lfs... mountroot: trying ffs... root file system type: ffs kern.module.path=/stand/sparc64/7.99.26/modules init: copying out path `/sbin/init' 11 Mon Aug 28 22:47:10 PDT 2017 Starting root file system check: /dev/rraid0a: file system is clean; not checking swapctl: setting dump device to /dev/raid1b swapctl: adding /dev/raid1b as swap device at priority 0 Starting file system checks: Loaded entropy from /var/db/entropy-file. Setting tty flags. Setting sysctl variables: ddb.onpanic: 2 -> 2 kern.maxvnodes: 419428 -> 524288 Starting network. Hostname: makimura.eterna23.net ifconfig: getifaddrs: Invalid argument Configuring network interfaces:. Adding interface aliases:. route: writing to routing socket: Network is unreachable add net default: gateway 172.16.24.183: Network is unreachable Building databases: dev, utmp, utmpx. Starting syslogd. Setting date via ntp. /etc/rc.d/ntpdate exited with code 1 Mounting all file systems... mount_nfs: rpcbind to nfs on server: RPC: Port mapper failure - RPC: Unable to send mount_nfs: rpcbind to nfs on server: RPC: Port mapper failure - RPC: Unable to send mount_nfs: rpcbind to nfs on server: RPC: Port mapper failure - RPC: Unable to send mount_nfs: rpcbind to nfs on server: RPC: Port mapper failure - RPC: Unable to send mount_nfs: rpcbind to nfs on server: RPC: Port mapper failure - RPC: Unable to send mount_nfs: rpcbind to nfs on server: RPC: Port mapper failure - RPC: Unable to send mount_nfs: rpcbind to nfs on server: RPC: Port mapper failure - RPC: Unable to send mount_nfs: rpcbind to nfs on server: RPC: Port mapper failure - RPC: Unable to send mount_nfs: rpcbind to nfs on server: RPC: Port mapper failure - RPC: Unable to send Clearing temporary files. Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 swapctl: setting dump device to /dev/raid1b Starting virecover. sendmail: fatal: inet_addr_local[getifaddrs]: getifaddrs: Invalid argument /etc/rc.d/virecover exited with code 1 Checking for core dump... savecore: no core dump Starting local daemons:. Updating motd. Starting ntpd. Starting sshd. /dev/rraid0c: Parity status: clean /dev/rraid1c: Parity status: clean Starting inetd. Starting cron. The following components reported failures: /etc/rc.d/ntpdate /etc/rc.d/virecover See /var/run/rc.log for more information. Mon Aug 28 22:47:28 PDT 2017 NetBSD/sparc64 (makimura.eterna23.net) (console) login: NetBSD/sparc64 (makimura.eterna23.net) (console) login: root Password: Last login: Wed Apr 1 22:17:04 2015 on console Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 7.99.26 (_makimura_) #0: Thu Mar 24 01:48:07 PDT 2016 Welcome to NetBSD! You have new mail. Terminal type is vt100. We recommend that you create a non-root account and use su(1) for root access. makimura#