Sun Blade 2000/1000 (2 X UltraSPARC-III+) , No Keyboard Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.16.4, 8192 MB memory installed, Serial #56326727. Ethernet address 0:3:ba:5b:7a:47, Host ID: 835b7a47. {0} ok boot net -a Boot device: /pci@8,700000/network@5,1: File and args: -a >> NetBSD/sparc64 OpenFirmware Boot, Revision 1.19 (Sat Aug 12 16:12:55 UTC 2017) Boot: disk1:sparc64-GENERIC.gz filename: prom_finddevice(disk1:sparc64-GENERIC.gz) returned f008e22c filename: not found devopen: you want boot.cfg filename: prom_finddevice(boot.cfg) returned ffffffff filename: found boot.cfg devopen: trying disk1:sparc64-GENERIC.gz devopen: found disk1:sparc64-GENERIC.gz devopen: disk1:sparc64-GENERIC.gz is called disk devopen: disk1:sparc64-GENERIC.gz is a block device real path: /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w500000e0104874d1,0:sparc64-GENERIC.gz devopen: replacing by whole disk device disk1:sparc64-GENERIC.gz:c devopen: opening disk1:sparc64-GENERIC.gz:c devopen: disk1:sparc64-GENERIC.gz:c is now open my-self: 0 my-address: 0 / my-unit: 1342177504 devopen: trying to read disklabel devopen: search_label returned Cannot read label devopen: back to original device disk1:sparc64-GENERIC.gz:a devopen: return 0 devopen: you want netbsd filename: prom_finddevice(netbsd) returned ffffffff filename: found netbsd devopen: trying disk1:sparc64-GENERIC.gz devopen: found disk1:sparc64-GENERIC.gz devopen: disk1:sparc64-GENERIC.gz is called disk devopen: disk1:sparc64-GENERIC.gz is a block device real path: /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w500000e0104874d1,0:sparc64-GENERIC.gz devopen: replacing by whole disk device disk1:sparc64-GENERIC.gz:c devopen: opening disk1:sparc64-GENERIC.gz:c devopen: disk1:sparc64-GENERIC.gz:c is now open my-self: 0 my-address: 0 / my-unit: 1342177504 devopen: trying to read disklabel devopen: setting partition 0 offset 0 devopen: found RAID partition, adjusting offset to 40 devopen: return 0 =0x9fb268 Loading netbsd: 10465832mmu_mapin: 0x1000000:0x1.0xff800000 kvamap_enter: 4194304@0x1000000 mmu_mapin: 0x1400000:0x1.0xff400000 kvamap_enter: 4194304@0x1400000 mmu_mapin: 0x1800000:0x1.0xff000000 kvamap_enter: 4194304@0x1800000 +630520mmu_mapin: 0x1c00000:0x1.0xfe800000 kvamap_enter: 4194304@0x1c00000 +451536 [673056+442820]=0xe19358 Loaded initial symtab at 0x1d08c70, strtab at 0x1dad190, # entries 28014 consinit() stdin node = f0083ea0 stdout package = f0083ea0 buffer @ 0x2005cb8 console is /pci@8,700000/ebus@5/serial@1,400000:a Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.2 (_makimura_) #1: Mon Aug 28 17:48:27 PDT 2017 mrg@space-bird.eterna23.net:/var/obj/sparc64/usr/src8/sys/arch/sparc64/compile/_makimura_ total memory = 8192 MB avail memory = 8026 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root): SUNW,Sun-Blade-1000 (Sun Blade 2000/1000): hostid 835b7a47 cpu0 at mainbus0: SUNW,UltraSPARC-III+ @ 1200 MHz, CPU id 0 cpu0: manuf 3e, impl 15, mask b0 cpu0: system tick frequency 5 MHz cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 8192K external (512 b/l) cpu1 at mainbus0: SUNW,UltraSPARC-III+ @ 1200 MHz, CPU id 1 cpu1: manuf 3e, impl 15, mask b0 cpu1: system tick frequency 5 MHz cpu1: 32K instruction (32 b/l), 64K data (32 b/l), 8192K external (512 b/l) memory-controller at mainbus0 not configured memory-controller at mainbus0 not configured schizo0 at mainbus0: addr 40004700000: Schizo, version 7, ign 200, bus B 0 to 1 schizo0: schizo0: pci bus B error PCIAFSR=0x0 PCIAFAR=0 PCICTRL=0x60000010f003f panic: schizo_pci_error: schizo0: fatal cpu0: Begin traceback... cpu0: End traceback... Stopped in pid 0.1 (system) at netbsd:cpu_Debugger+0x4: nop db{0}> mach prom Type 'go' to resume {1} ok boot sparc64-GENERIC.gz Resetting ...Probing system devices screen not found. keyboard not found. Keyboard not present. Using ttya for input and output. Probing system devices Sun Blade 2000/1000 (2 X UltraSPARC-III+) , No Keyboard Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.16.4, 8192 MB memory installed, Serial #56326727. Ethernet address 0:3:ba:5b:7a:47, Host ID: 835b7a47. Rebooting with command: boot sparc64-GENERIC.gz Boot device: /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@2,0 File and args: sparc64-GENERIC.gz NetBSD IEEE 1275 Multi-FS Bootblock Version $NetBSD: bootblk.fth,v 1.11 2010/02/17 15:49:19 eeh Exp $ >> NetBSD/sparc64 OpenFirmware Boot, Revision 1.15 =0xc99d78 Loading sparc64-GENERIC.gz: 10319656+630072+348608 [652992+432572]=0xdf8778 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.2 (GENERIC) #2: Thu Aug 31 10:33:25 CEST 2017 martin@seven-days-to-the-wolves.aprisoft.de:/work/src/sys/arch/sparc64/compile/GENERIC total memory = 8192 MB avail memory = 8026 MB running cgd selftest aes-xts-256 aes-xts-512 done bootpath: /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w500000e0104874d1,0:a bootpath phandle: 0xf008e22c boot target: disk@w500000e0104874d1,0 boot partition: a mainbus0 (root): SUNW,Sun-Blade-1000 (Sun Blade 2000/1000): hostid 835b7a47 cpu0 at mainbus0 [device cpu0 has node f0060770] : SUNW,UltraSPARC-III+ @ 1200 MHz, CPU id 0 cpu0: manuf 3e, impl 15, mask b0 cpu0: system tick frequency 5 MHz cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 8192K external (512 b/l) cpu1 at mainbus0 [device cpu1 has node f0061108] : SUNW,UltraSPARC-III+ @ 1200 MHz, CPU id 1 cpu1: manuf 3e, impl 15, mask b0 cpu1: system tick frequency 5 MHz cpu1: 32K instruction (32 b/l), 64K data (32 b/l), 8192K external (512 b/l) memory-controller at mainbus0 not configured memory-controller at mainbus0 not configured schizo0 at mainbus0 [device schizo0 has node f0061680] : addr 40004700000: Schizo, version 7, ign 200, bus B 0 to 1 schizo0: pci0 at schizo0 ebus0 at pci0 dev 5 function 0 [device ebus0 has node f0079680] ebus0: Sun Microsystems PCIO Ebus2 (US III), revision 0x01 flashprom at ebus0 addr 0-1fffff not configured pcfiic0 at ebus0 addr 2e-2f, 2d-2d ipl 23 [device pcfiic0 has node f007bc04] : iic mux present iic0 at pcfiic0: I2C bus seeprom0 at iic0 addr 0x50 [device seeprom0 has node f007d0f8] : nvram: size 8192 seeprom1 at iic0 addr 0xd0 [device seeprom1 has node f007d624] : dimm-fru: size 8192 seeprom2 at iic0 addr 0xd1 [device seeprom2 has node f007d8f4] : dimm-fru: size 8192 seeprom3 at iic0 addr 0xd2 [device seeprom3 has node f007dbc4] : dimm-fru: size 8192 seeprom4 at iic0 addr 0xd3 [device seeprom4 has node f007de94] : dimm-fru: size 8192 seeprom5 at iic0 addr 0xd4 [device seeprom5 has node f007e164] : dimm-fru: size 8192 seeprom6 at iic0 addr 0xd5 [device seeprom6 has node f007e434] : dimm-fru: size 8192 seeprom7 at iic0 addr 0xd6 [device seeprom7 has node f007e704] : dimm-fru: size 8192 seeprom8 at iic0 addr 0xd7 [device seeprom8 has node f007e9d4] : dimm-fru: size 8192 bbc at ebus0 addr 0-fffff not configured ppm at ebus0 addr e-28, 728000-728003, 30002e-30002f, 300600-300607 not configured pcfiic1 at ebus0 addr 30-31 ipl 23 [device pcfiic1 has node f007f00c] iic1 at pcfiic1: I2C bus seeprom9 at iic1 addr 0x50 [device seeprom9 has node f00804f4] : cpu-fru: size 8192 admtemp0 at iic1 addr 0x18 [device admtemp0 has node f00807c4] : MAX1617A temperature sensor: id. 0x4d, rev. 0x01 seeprom10 at iic1 addr 0x51 [device seeprom10 has node f00808b4] : cpu-fru: size 8192 admtemp1 at iic1 addr 0x4c [device admtemp1 has node f0080b84] : MAX1617A temperature sensor: id. 0x4d, rev. 0x01 tda0 at iic1 addr 0x24 [device tda0 has node f0080c74] : fan-control card-reader at iic1 addr 0x20 not configured seeprom11 at iic1 addr 0x54 [device seeprom11 has node f0080e04] : motherboard-fru: size 8192 i2c-bridge at iic1 addr 0x30 not configured beep at ebus0 addr 32-37 not configured audiocs0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ipl 20 ipl 21 [device audiocs0 has node f008132c] : CS4231 audio0 at audiocs0: full duplex, playback, capture, mmap audiocs0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000 spkr0 at audio0: PC Speaker (synthesized) wsbell at spkr0 not configured rtc0 at ebus0 addr 300070-300071 ipl 24 [device rtc0 has node f008152c] : mc146818 compatible time-of-day clock: ds1287 gpio at ebus0 addr 300600-300607 not configured pmc at ebus0 addr 300700-300701 not configured floppy at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 25 not configured lpt0 at ebus0 addr 300278-300287, 30002e-30002f, 700000-70000f ipl 1c [device lpt0 has node f0083d48] sab0 at ebus0 addr 400000-40007f ipl 22 [device sab0 has node f0083ea0] : rev 3.2 sabtty0 at sab0 port 0: console i/o sabtty1 at sab0 port 1 gem0 at pci0 dev 5 function 1 [device gem0 has node f008f1dc] : Sun Microsystems ERI Ethernet (rev. 0x01) gem0: interrupting at ivec 321d ukphy0 at gem0 phy 1: OUI 0x0006b8, model 0x000c, rev. 1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto gem0: Ethernet address 00:03:ba:5b:7a:47, 2KB RX fifo, 2KB TX fifo fwohci0 at pci0 dev 5 function 2 [device fwohci0 has node f00972d0] : Sun Microsystems FireWire Controller (rev. 0x01) fwohci0: interrupting at ivec 21e fwohci0: OHCI version 1.0 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:03:ba:ff:fe:5b:7a:47 fwohci0: Phy 1394a available S400, 4 ports. fwohci0: Link S400, max_rec 2048 bytes. ieee1394if0 at fwohci0: IEEE1394 bus fwip0 at ieee1394if0: IP over IEEE1394 fwohci0: Initiate bus reset ohci0 at pci0 dev 5 function 3 [device ohci0 has node f0097630] : Sun Microsystems USB Controller (rev. 0x01) ohci0: interrupting at ivec 21f ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 esiop0 at pci0 dev 6 function 0 [device esiop0 has node f009d7f0] : Symbios Logic 53c875 (ultra-wide scsi) esiop0: using on-board RAM esiop0: interrupting at ivec 1a18 scsibus0 at esiop0: 16 targets, 8 luns per target esiop1 at pci0 dev 6 function 1 [device esiop1 has node f00a37b0] : Symbios Logic 53c875 (ultra-wide scsi) esiop1: using on-board RAM esiop1: interrupting at ivec 1a19 scsibus1 at esiop1: 16 targets, 8 luns per target ppb0 at pci0 dev 2 function 0 [device ppb0 has node f00a9770] : Intel S21152BA,S21154AE/BE PCI-PCI Bridge (rev. 0x00) pci1 at ppb0 bus 1 cas0 at pci1 dev 0 function 0 [device cas0 has node f00aaa08] : Sun Microsystems Cassini Gigabit Ethernet (rev. 0x20) cas0: interrupting at ivec 3210 cas0: Ethernet address 00:03:ba:5b:7a:47 brgphy0 at cas0 phy 1: BCM5401 1000BASE-T media interface, rev. 3 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto schizo1 at mainbus0 [device schizo1 has node f006a214] : addr 40004600000: Schizo, version 7, ign 200, bus A 0 to 0 schizo1: pci2 at schizo1 isp0 at pci2 dev 4 function 0 [device isp0 has node f0088fb4] : QLogic FC-AL and Fabric HBA isp0: interrupting at ivec 204 isp0: invalid NVRAM header isp0: invalid NVRAM header isp0: bad frame length (0) from NVRAM- using 1024 isp0: bad execution throttle of 0- using 16 upa0 at mainbus0 [device upa0 has node f0071548] ppm at mainbus0 not configured pcons at mainbus0 not configured fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) ieee1394if0: bus manager 0 No counter-timer -- using %stick at 5MHz as system clock. scsibus0: waiting 2 seconds for devices to settle... scsibus1: waiting 2 seconds for devices to settle... scsibus2 at isp0: 256 targets, 8 luns per target uhub0 at usb0: Sun Microsystems (0x108e) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 scsibus2: waiting 2 seconds for devices to settle... cd0 at scsibus0 target 6 lun 0: cdrom removabledev_path_drive_match: cd0, controller f009d7f0, target 6 wwn 0000000000000000 lun 0 cd0: sync (50.00ns offset 16), 8-bit (20.000MB/s) transfers sd0 at scsibus2 target 0 lun 0: disk fixeddev_path_drive_match: sd0, controller f0088fb4, target 0 wwn 0000000000000000 lun 0 sd0: 70007 MB, 14089 cyl, 24 head, 424 sec, 512 bytes/sect x 143374738 sectors dev_path_drive_match: sd0, controller f008db30, target 0 wwn 500000e0102f2d41 lun 0 found controller of bootdevice sd1 at scsibus2 target 1 lun 0: disk fixeddev_path_drive_match: sd1, controller f0088fb4, target 1 wwn 0000000000000000 lun 0 sd1: 70007 MB, 14089 cyl, 24 head, 424 sec, 512 bytes/sect x 143374738 sectors dev_path_drive_match: sd1, controller f008db30, target 1 wwn 500000e0104874d1 lun 0 found controller of bootdevice found boot device: sd1, partition 0 sd0: 25426 trailing sectors not covered by disklabel sd0: 25426 trailing sectors not covered by disklabel sd1: 25426 trailing sectors not covered by disklabel sd1: 25426 trailing sectors not covered by disklabel raid0: RAID Level 1 raid0: Components: /dev/sd1a /dev/sd0a raid0: Total Sectors: 126182272 (61612 MB) raid1: RAID Level 1 raid1: Components: /dev/sd1b /dev/sd0b raid1: Total Sectors: 17166848 (8382 MB) root on raid0a dumps on raid0b root file system type: ffs kern.module.path=/stand/sparc64/8.99.2/modules Thu Aug 31 03:21:03 PDT 2017 Starting root file system check: /dev/rraid0a: file system is clean; not checking swapctl: setting dump device to /dev/raid1b swapctl: adding /dev/raid1b as swap device at priority 0 Starting file system checks: random_seed: /var/db/entropy-file: Not present Setting tty flags. Setting sysctl variables: ddb.onpanic: 1 -> 2 kern.maxvnodes: 419428 -> 524288 Starting network. Hostname: makimura.eterna23.net IPv6 mode: host Configuring network interfaces: gem0. Adding interface aliases:. add net default: gateway 172.16.24.183 Waiting for DAD to complete for statically configured addresses... Building databases: dev, utmp, utmpx. Starting syslogd. Setting date via ntp. Mounting all file systems... mount_nfs: can't access /var/obj: Permission denied /etc/rc.d/mountall exited with code 1 Clearing temporary files. Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 swapctl: setting dump device to /dev/raid1b Starting virecover. Checking for core dump... savecore: no core dump Starting local daemons:. Updating motd. Starting ntpd. Starting sshd. /dev/rraid0c: Parity status: clean Starting inetd. Starting cron. The following components reported failures: /etc/rc.d/mountall See /var/run/rc.log for more information. Thu Aug 31 03:21:20 PDT 2017 NetBSD/sparc64 (makimura.eterna23.net) (console) login: