[     1.000003] ahcisata0 at acpi0 (SAT0, NXP0004-0): mem 0x3200000-0x320ffff,0x700100520-0x700100523 irq 165,166,167
[     1.000003] ahcisata0: using 64-bit DMA
[     1.000003] ahcisata0: ignoring broken port multiplier support
[     1.000003] ahcisata0: AHCI revision 1.31, 1 port, 32 slots, CAP 0xe535ff80<CCCS,PSC,SSC,PMD,FBSS,SAM,ISS=0x3=Gen3,SCLO,SALP,SSNTF,SNCQ,S64A>
[     1.000003] atabus0 at ahcisata0 channel 0
[     1.933727] ahcisata0 port 0: device present, speed: 6.0Gb/s
[     2.533737] ahcisata0 port 0: device present, speed: 6.0Gb/s
[     3.533750] wd0 at atabus0 drive 0
[     3.633752] ahcisata0 port 0: device present, speed: 6.0Gb/s
[     3.633752] ahcisata0 port 0: device present, speed: 6.0Gb/s
[     4.133757] wd0: autoconfiguration error: IDENTIFY failed
[     4.133757] wd0: fixing 0 sector size
[     4.143758] wd0: secperunit and ncylinders are zero
[     4.143758] wd0: secperunit and (sectors or tracks) are zero
[     4.233759] ahcisata0 port 0: device present, speed: 6.0Gb/s
[     4.733765] wd0(ahcisata0:0:0): using PIO mode 0
[     4.833766] ahcisata0 port 0: device present, speed: 6.0Gb/s