[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018, 2019, 2020, 2021 The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 9.99.82 (_phat_) #1: Sun Aug 29 19:39:12 PDT 2021 [ 1.000000] mrg@yesterday-when-i-was-mad.eterna23.net:/var/obj/i386/usr/branches/riastradh-drm/netbsd-src/sys/arch/i386/compile/_phat_ [ 1.000000] total memory = 2047 MB [ 1.000000] avail memory = 1994 MB [ 1.000000] entropy: entering seed from bootloader with 0 bits of entropy [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [ 1.000003] Dell Computer Corporation Inspiron 8500 [ 1.000003] mainbus0 (root) [ 1.000003] ACPI: RSDP 0x00000000000FDF00 000014 (v00 DELL ) [ 1.000003] ACPI: RSDT 0x000000007FFF0000 000028 (v01 DELL CPi R 27D4070C ASL 00000061) [ 1.000003] ACPI: FACP 0x000000007FFF0400 000074 (v01 DELL CPi R 27D4070C ASL 00000061) [ 1.000003] ACPI: DSDT 0x000000007FFF0C00 Logical table override, new table: 0x00000000C0DDE280 [ 1.000003] ACPI: DSDT 0x00000000C0DDE280 002A68 (v01 INT430 SYSFexxx 00001001 INTL 20080729) [ 1.000003] ACPI: FACS 0x000000007FFFF800 000040 [ 1.000003] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.000003] cpu0 at mainbus0 [ 1.000003] cpu0: Use lfence to serialize rdtsc [ 1.000003] cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 2.20GHz, id 0xf29 [ 1.000003] cpu0: node 0, package 0, core 0, smt 0 [ 1.000003] acpi0 at mainbus0: Intel ACPICA 20210331 [ 1.000003] acpi0: X/RSDT: OemId , AslId [ 1.000003] LNKA: ACPI: Found matching pin for 0.31.INTA at func 1: 0 [ 1.000003] LNKB: ACPI: Found matching pin for 0.31.INTB at func 5: 11 [ 1.000003] LNKB: BIOS IRQ 11 for 0.31.INTB is invalid [ 1.000003] LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 11 [ 1.000003] LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 11 [ 1.000003] LNKC: ACPI: Found matching pin for 0.29.INTC at func 2: 11 [ 1.000003] LNKH: ACPI: Found matching pin for 0.29.INTD at func 7: 11 [ 1.000003] LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 11 [ 1.000003] LNKD: ACPI: Found matching pin for 2.1.INTA at func 0: 255 [ 1.000003] LNKD: ACPI: Found matching pin for 2.1.INTA at func 1: 11 [ 1.000003] LNKB: ACPI: Found matching pin for 2.3.INTA at func 0: 11 [ 1.000003] LNKB: BIOS IRQ 11 for 2.3.INTA is invalid [ 1.000003] LNKC: ACPI: Found matching pin for 2.0.INTA at func 0: 11 [ 1.000003] acpi0: SCI interrupting at int 9 [ 1.000003] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 [ 1.005558] acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter [ 1.005558] acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery [ 1.005558] acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery [ 1.005558] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch [ 1.005558] acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button [ 1.005558] acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button [ 1.005558] MB1 (PNP0C01) at acpi0 not configured [ 1.005558] MB2 (PNP0C01) at acpi0 not configured [ 1.005558] MB3 (PNP0C01) at acpi0 not configured [ 1.005558] pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12 [ 1.005558] pckbc2 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64 irq 1 [ 1.005558] attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0 [ 1.005558] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61,0x63,0x65,0x67 [ 1.005558] midi0 at pcppi1: PC speaker [ 1.005558] sysbeep0 at pcppi1 [ 1.005558] MB4 (PNP0C01) at acpi0 not configured [ 1.005558] COPR (PNP0C04) at acpi0 not configured [ 1.005558] UAR1 (PNP0501) at acpi0 not configured [ 1.005558] ECP (PNP0401) at acpi0 not configured [ 1.005558] acpivga0 at acpi0 (VID): ACPI Display Adapter [ 1.005558] acpiout0 at acpivga0 (TV, 0x0200): ACPI Display Output Device [ 1.005558] acpiout1 at acpivga0 (CRT, 0x0100): ACPI Display Output Device [ 1.005558] acpiout2 at acpivga0 (CRT2, 0x0120): ACPI Display Output Device [ 1.005558] acpiout3 at acpivga0 (LCD, 0x0110): ACPI Display Output Device [ 1.005558] acpiout4 at acpivga0 (DVI, 0x0210): ACPI Display Output Device [ 1.005558] acpivga0: connected output devices: [ 1.005558] acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0, bios detect [ 1.005558] acpivga0: 0x0120 (acpiout2): Unknown Output Device, head 0, bios detect [ 1.005558] acpivga0: 0x0200 (acpiout0): TV, head 0, bios detect [ 1.005558] acpivga0: 0x0110 (acpiout3): LCD Panel, head 0, bios detect [ 1.005558] acpivga0: 0x0210 (acpiout4): Unknown Output Device, head 0, bios detect [ 1.005558] acpitz0 at acpi0 (THM) [ 1.005558] acpitz0: levels: critical 90.0 C, passive cooling [ 1.005558] apm0 at acpi0: Power Management spec V1.2 [ 1.005558] ACPI: Enabled 2 GPEs in block 00 to 1F [ 1.005558] pckbd0 at pckbc2 (kbd slot) [ 1.005558] pckbc2: using irq 1 for kbd slot [ 1.005558] wskbd0 at pckbd0 mux 1 [ 1.005558] pms0 at pckbc2 (aux slot) [ 1.005558] pckbc2: using irq 12 for aux slot [ 1.005558] wsmouse0 at pms0 mux 0 [ 1.005558] attimer1: attached to pcppi1 [ 1.005558] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.005558] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.005558] pchb0 at pci0 dev 0 function 0: Intel 82845 Host (rev. 0x04) [ 1.005558] agp0 at pchb0: aperture at 0xe0000000, size 0x8000000 [ 1.005558] ppb0 at pci0 dev 1 function 0: Intel 82845 AGP (rev. 0x04) [ 1.005558] pci1 at ppb0 bus 1 [ 1.005558] pci1: i/o space, memory space enabled [ 1.005558] radeon0 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility 9000 (M9) Lf (rev. 0x01) [ 1.005558] uhci0 at pci0 dev 29 function 0: Intel 82801DB USB UHCI Controller (rev. 0x03) [ 1.005558] uhci0: interrupting at irq 11 [ 1.005558] usb0 at uhci0: USB revision 1.0 [ 1.005558] uhci1 at pci0 dev 29 function 1: Intel 82801DB USB UHCI Controller (rev. 0x03) [ 1.005558] uhci1: interrupting at irq 11 [ 1.005558] usb1 at uhci1: USB revision 1.0 [ 1.005558] uhci2 at pci0 dev 29 function 2: Intel 82801DB USB UHCI Controller (rev. 0x03) [ 1.005558] uhci2: interrupting at irq 11 [ 1.005558] usb2 at uhci2: USB revision 1.0 [ 1.005558] ehci0 at pci0 dev 29 function 7: Intel 82801DB USB EHCI Controller (rev. 0x03) [ 1.005558] ehci0: interrupting at irq 11 [ 1.005558] ehci0: EHCI version 1.0 [ 1.005558] ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2 [ 1.005558] usb3 at ehci0: USB revision 2.0 [ 1.005558] ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x83) [ 1.005558] pci2 at ppb1 bus 2 [ 1.005558] pci2: i/o space, memory space enabled [ 1.005558] bce0 at pci2 dev 0 function 0: Broadcom BCM4401 10/100 Ethernet [ 1.005558] bce0: interrupting at irq 11 [ 1.005558] bmtphy0 at bce0 phy 1: BCM4401 10/100 media interface, rev. 0 [ 1.005558] bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.005558] bce0: Ethernet address 00:0b:db:9a:dc:8b [ 1.005558] cbb0 at pci2 dev 1 function 0: Texas Instruments PCI4510 PCI-CardBus Bridge w/ IEEE 1394 Host Controller (rev. 0x02) [ 1.005558] fwohci0 at pci2 dev 1 function 1: Texas Instruments PCI4510 IEEE 1394 Host Controller w/ PCI-CardBus Bridge (rev. 0x00) [ 1.005558] fwohci0: interrupting at irq 11 [ 1.005558] fwohci0: OHCI version 1.10 (ROM=0) [ 1.005558] fwohci0: No. of Isochronous channels is 4. [ 1.005558] fwohci0: EUI64 32:4f:c0:00:3b:94:a0:38 [ 1.005558] fwohci0: Phy 1394a available S400, 2 ports. [ 1.005558] fwohci0: Link S400, max_rec 2048 bytes. [ 1.005558] ieee1394if0 at fwohci0: IEEE1394 bus [ 1.005558] fwip0 at ieee1394if0: IP over IEEE1394 [ 1.005558] fwohci0: Initiate bus reset [ 1.005558] fwohci0: Clear PME# now [ 1.005558] iwi0 at pci2 dev 3 function 0: Intel PRO/Wireless LAN 2915ABG Mini-PCI Adapter (rev. 0x05) [ 1.005558] LNKB: Picked IRQ 9 with weight 0 [ 1.005558] iwi0: interrupting at irq 9 [ 1.005558] iwi0: 802.11 address 00:0e:35:d7:3e:05 [ 1.005558] cbb0: cacheline 0x8 lattimer 0x20 [ 1.005558] cbb0: bhlc 0x822008 [ 1.005558] cbb0: interrupting at irq 11 [ 1.005558] cardslot0 at cbb0 [ 1.005558] cardbus0 at cardslot0: bus 3 [ 1.005558] pcmcia0 at cardslot0 [ 1.005558] ichlpcib0 at pci0 dev 31 function 0: Intel 82801DB LPC Interface Bridge (rev. 0x03) [ 1.005558] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 [ 1.005558] ichlpcib0: 24-bit timer [ 1.005558] tco0 at ichlpcib0: TCO (watchdog) timer configured. [ 1.005558] tco0: Min/Max interval 2/37 seconds [ 1.005558] ichlpcib0: SpeedStep enabled [ 1.005558] piixide0 at pci0 dev 31 function 1: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x03) [ 1.005558] piixide0: bus-master DMA support present [ 1.005558] piixide0: primary channel configured to compatibility mode [ 1.005558] piixide0: primary channel interrupting at irq 14 [ 1.005558] atabus0 at piixide0 channel 0 [ 1.005558] piixide0: secondary channel configured to compatibility mode [ 1.005558] piixide0: secondary channel interrupting at irq 15 [ 1.005558] atabus1 at piixide0 channel 1 [ 1.005558] auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio [ 1.005558] auich0: interrupting at irq 9 [ 1.005558] auich0: ac97: SigmaTel STAC9750/51 codec; headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D [ 1.005558] auich0: ac97: ext id 0x605 [ 1.005558] isa0 at ichlpcib0 [ 1.005558] lpt0 at isa0 port 0x378-0x37b irq 7 [ 1.005558] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 1-byte FIFO [ 1.005558] com0: console [ 1.005558] acpicpu0 at cpu0: ACPI CPU [ 1.005558] acpicpu0: C1: HLT, lat 0 us, pow 0 mW [ 1.005558] acpicpu0: C2: I/O, lat 50 us, pow 0 mW [ 1.005558] acpicpu0: C3: I/O, lat 50 us, pow 0 mW [ 1.005558] acpicpu0: P0: I/O, lat 250 us, pow 20000 mW, 2200 MHz [ 1.005558] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % [ 1.005558] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 % [ 1.005558] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 % [ 1.005558] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 % [ 1.005558] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 % [ 1.005558] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 % [ 1.005558] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 % [ 1.005558] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 % [ 1.005558] fwohci0: BUS reset [ 1.005558] fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode [ 1.005558] ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) [ 1.005558] ieee1394if0: bus manager 0 [ 1.005558] entropy: WARNING: extracting entropy too early [ 1.353783] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.353783] iwi0: link state DOWN (was UNKNOWN) [ 1.360064] acpiacad0: AC adapter online. [ 1.720061] auich0: measured ac97 link rate at 48003 Hz, will use 48000 Hz [ 1.720061] audio0 at auich0: playback, capture, full duplex, independent [ 1.720061] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback [ 1.735580] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording [ 1.743118] uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.753296] uhub0: 2 ports with 2 removable, self powered [ 1.753296] uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.763052] uhub1: 2 ports with 2 removable, self powered [ 1.763052] uhub2 at usb2: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.772778] uhub2: 2 ports with 2 removable, self powered [ 1.772778] uhub3 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.782523] uhub3: 6 ports with 6 removable, self powered [ 1.782523] IPsec: Initialized Security Association Processing. [ 1.790069] aes: Intel SSE2 bitsliced [ 1.790069] chacha: x86 SSE2 ChaCha [ 1.790069] adiantum: self-test passed [ 1.790069] aes_ccm: self-test passed [ 1.790069] blake2s: self-test passed [ 3.090078] ehci0: handing over full speed device on port 1 to uhci0 [ 4.780104] wd0 at atabus0 drive 0 [ 4.790106] wd0: [ 4.790106] wd0: drive supports 16-sector PIO transfers, LBA addressing [ 4.790106] wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors [ 4.880105] wd0: 32-bit data port [ 4.890107] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) [ 4.900106] wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) [ 4.900106] atapibus0 at atabus1: 2 targets [ 4.910111] cd0 at atapibus0 drive 0: cdrom removable [ 4.923527] cd0: 32-bit data port [ 4.923527] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) [ 4.923527] cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) [ 4.930111] cgd: self-test aes-xts-256 [ 4.930111] cgd: self-test aes-xts-512 [ 4.930111] cgd: self-test aes-cbc-128 [ 4.930111] cgd: self-test aes-cbc-256 [ 4.930111] cgd: self-test 3des-cbc-192 [ 4.930111] cgd: self-test blowfish-cbc-448 [ 4.930111] cgd: self-test aes-cbc-128 (encblkno8) [ 4.930111] cgd: self-tests passed [ 4.990108] boot device: wd0 [ 5.000221] root on bce0 [ 5.002855] nfs_boot: trying DHCP/BOOTP [ 5.002855] bce0: link state DOWN (was UNKNOWN) [ 5.040108] uhidev0 at uhub0 port 1 configuration 1 interface 0 [ 5.040108] uhidev0: Logitech (0x046d) USB Receiver (0xc52b), rev 2.00/12.01, addr 2, iclass 3/1 [ 5.070109] ukbd0 at uhidev0 [ 5.480114] wskbd1 at ukbd0 mux 1 [ 5.480114] uhidev1 at uhub0 port 1 configuration 1 interface 1 [ 5.480114] uhidev1: Logitech (0x046d) USB Receiver (0xc52b), rev 2.00/12.01, addr 2, iclass 3/1 [ 5.520115] uhidev1: 8 report ids [ 5.532914] ums0 at uhidev1 reportid 2: 16 buttons, W and Z dirs [ 5.532914] wsmouse1 at ums0 mux 0 [ 5.541732] uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 [ 5.541732] uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0 [ 5.551537] uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0 [ 5.561720] uhidev2 at uhub0 port 1 configuration 1 interface 2 [ 5.561720] uhidev2: Logitech (0x046d) USB Receiver (0xc52b), rev 2.00/12.01, addr 2, iclass 3/0 [ 5.590116] uhidev2: 33 report ids [ 5.600986] uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0 [ 5.600986] uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0 [ 5.610336] uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0 [ 5.621072] uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0 [ 7.000137] bce0: link state UP (was DOWN) [ 8.180156] nfs_boot: DHCP next-server: 172.16.24.55 [ 8.180156] nfs_boot: my_domain=eterna23.net [ 8.190426] nfs_boot: my_addr=172.16.24.181 [ 8.190426] nfs_boot: my_mask=255.255.255.0 [ 8.190426] nfs_boot: gateway=172.16.24.183 [ 14.200248] root on 172.16.24.55:/export/root/phat [ 14.200248] root time: 0x612d52c0 [ 14.211502] kern.module.path=/stand/i386/9.99.82/modules [ 14.211502] kern info: [drm] initializing kernel modesetting (RV250 0x1002:0x4C66 0x1028:0x013E 0x01). [ 14.226300] kern info: [drm] register mmio base: 0xfcff0000 [ 14.231846] kern info: [drm] register mmio size: 65536 [ 14.240252] radeon0: info: GTT: 128M 0xE0000000 - 0xE7FFFFFF [ 14.250265] radeon0: info: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (32M used) [ 14.260269] kern info: [drm] Detected VRAM RAM=80M, BAR=128M [ 14.260269] kern info: [drm] RAM width 64bits DDR [ 14.272552] Zone kernel: Available graphics memory: 791246 KiB [ 14.272552] kern info: [drm] radeon: 32M of VRAM memory ready [ 14.284204] kern info: [drm] radeon: 128M of GTT memory ready. [ 14.290493] radeon0: info: WB disabled [ 14.290493] radeon0: info: fence driver on ring 0 use gpu addr 0x00000000e0000000 and cpu addr 0x0xdc0ec000 [ 14.303915] kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 14.311455] kern info: [drm] Driver supports precise vblank timestamp query. [ 14.311455] radeon0: interrupting at irq 11 (radeon0) [ 14.323502] kern info: [drm] radeon: irq initialized. [ 14.323502] kern info: [drm] Loading R200 Microcode [ 14.334701] kern info: [drm] radeon: ring at 0x00000000E0001000 [ 14.345617] kern info: [drm] ring test succeeded in 0 usecs [ 14.351158] kern info: [drm] ib test succeeded in 0 usecs [ 14.360298] kern info: [drm] Panel ID String: U0674^B<2147483546>M1LW02 [ 14.360298] kern info: [drm] Panel Size 1920x1200 [ 14.372445] kern info: [drm] No TV DAC info found in BIOS [ 14.372445] kern info: [drm] Radeon Display Connectors [ 14.382931] kern info: [drm] Connector 0: [ 14.382931] kern info: [drm] VGA-1 [ 14.390469] kern info: [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 14.390469] kern info: [drm] Encoders: [ 14.401303] kern info: [drm] CRT1: INTERNAL_DAC1 [ 14.401303] kern info: [drm] Connector 1: [ 14.401303] kern info: [drm] DVI-D-1 [ 14.413957] kern info: [drm] HPD1 [ 14.413957] kern info: [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 14.424356] kern info: [drm] Encoders: [ 14.424356] kern info: [drm] DFP1: INTERNAL_TMDS1 [ 14.433283] kern info: [drm] Connector 2: [ 14.433283] kern info: [drm] LVDS-1 [ 14.440910] kern info: [drm] Encoders: [ 14.440910] kern info: [drm] LCD1: INTERNAL_LVDS [ 14.440910] kern info: [drm] Connector 3: [ 14.453738] kern info: [drm] SVIDEO-1 [ 14.453738] kern info: [drm] Encoders: [ 14.461449] kern info: [drm] TV1: INTERNAL_DAC2 [ 14.520258] radeondrmkmsfb0 at radeon0 [ 14.520258] kern info: [drm] Initialized radeon 2.50.0 20080528 for radeon0 on minor 0 [ 14.537458] radeondrmkmsfb0: framebuffer at 0xe8040000, size 1920x1200, depth 16, stride 3840 [ 14.690261] wsdisplay0 at radeondrmkmsfb0 kbdmux 1 [ 14.700408] wsmux1: connecting to wsdisplay0 [ 14.700408] wskbd0: connecting to wsdisplay0 [ 14.700408] wskbd1: connecting to wsdisplay0 [ 14.700408] init: copying out path `/sbin/init' 11 [ 16.300290] WARNING: module error: vfs load failed for `ipl', error 2 [ 16.312269] WARNING: module error: vfs load failed for `ipl', error 2 [ 16.340290] WARNING: module error: vfs load failed for `ipl', error 2 [ 16.370297] WARNING: module error: vfs load failed for `ipl', error 2 [ 17.860325] WARNING: module error: vfs load failed for `if_iwi', error 2 [ 20.280352] wsdisplay0: screen 0 added (default, vt100 emulation) [ 20.300358] wsdisplay0: screen 1 added (default, vt100 emulation) [ 20.310356] wsdisplay0: screen 2 added (default, vt100 emulation) [ 20.330358] wsdisplay0: screen 3 added (default, vt100 emulation) [ 20.340355] wsdisplay0: screen 4 added (default, vt100 emulation) [ 20.360358] wsdisplay0: screen 5 added (default, vt100 emulation)