[ 1.000000] pool redzone disabled for 'kmem-04096' [ 1.000000] ksyms: checking .text [ 1.000000] ksyms: checking .rodata [ 1.000000] ksyms: checking link_set_evcnts [ 1.000000] ksyms: checking .eh_frame [ 1.000000] ksyms: checking link_set_arm_platforms [ 1.000000] ksyms: checking link_set_fdt_consoles [ 1.000000] ksyms: checking link_set_arm_cpu_methods [ 1.000000] ksyms: checking link_set_sysctl_funcs [ 1.000000] ksyms: checking link_set_sdt_argtypes_set [ 1.000000] ksyms: checking link_set_sdt_probes_set [ 1.000000] ksyms: checking link_set_fdt_opps [ 1.000000] ksyms: checking link_set_modules [ 1.000000] ksyms: checking link_set_sdt_providers_set [ 1.000000] ksyms: checking link_set_ieee80211_funcs [ 1.000000] ksyms: checking link_set_domains [ 1.000000] ksyms: checking link_set_linux_module_param_desc [ 1.000000] ksyms: checking link_set_linux_module_param_info [ 1.000000] ksyms: checking link_set_dkwedge_methods [ 1.000000] ksyms: checking link_set_prop_linkpools [ 1.000000] ksyms: checking .data [ 1.000000] ksyms: checking .data.cacheline_aligned [ 1.000000] ksyms: checking .data.read_mostly [ 1.000000] ksyms: checking .bss [ 1.000000] ksyms: checking .ident [ 1.000000] ksyms: checking .comment [ 1.000000] ksyms: checking .note.netbsd.ident [ 1.000000] ksyms: checking .symtab [ 1.000000] ksyms: checking .strtab [ 1.000000] ksyms: checking .shstrtab [ 1.000000] Loaded initial symtab at 0xffffc00000f1d890, strtab at 0xffffc00001005910, # entries 39600 [ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 9.99.77 (_rocksteady_) #11: Thu Dec 31 00:40:39 CST 2020 [ 1.000000] mrg@aches.eterna23.net:/var/obj/evbarm-aarch64/usr/src/sys/arch/evbarm/compile/_rocksteady_ [ 1.000000] total memory = 998 MB [ 1.000000] avail memory = 966 MB [ 1.000000] pool redzone disabled for 'buf4k' [ 1.000000] pool redzone disabled for 'buf64k' [ 1.000000] entropy: no seed from bootloader [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] NET_MPSAFE enabled [ 1.000000] Kernelized RAIDframe activated [ 1.000000] armfdt0 (root) [ 1.000000] simplebus0 at armfdt0: Pine64 Rock64 [ 1.000000] simplebus0: set default config for cpus [ 1.000000] cpus0 at simplebus0 (/cpus) [ 1.000000] cpus0: WARNING: power management not supported [ 1.000000] simplebus0: set default config for amba [ 1.000000] simplebus1 at simplebus0 (/amba) [ 1.000000] simplebus1: WARNING: power management not supported [ 1.000000] simplebus0: set default config for psci [ 1.000000] psci0 at simplebus0 (/psci): PSCI 1.0 [ 1.000000] psci0: WARNING: power management not supported [ 1.000000] simplebus0: set default config for chosen [ 1.000000] simplebus2 at simplebus0 (/chosen) [ 1.000000] simplebus2: WARNING: power management not supported [ 1.000000] cpus0: set default config for cpu@0 [ 1.000000] cpu0 at cpus0 (/cpus/cpu@0): Arm Cortex-A53 r0p4 (v8-A), id 0x0 [ 1.000000] cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.000000] cpu0: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.000000] cpu0: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 [ 1.000000] cpu0: L1 32KB/64B*256L*2W VIPT Instruction cache [ 1.000000] cpu0: L1 32KB/64B*128L*4W PIPT Data cache [ 1.000000] cpu0: L2 256KB/64B*256L*16W PIPT Unified cache [ 1.000000] cpu0: midr=0x410fd034 mpidr=0x80000000 [ 1.000000] cpu0: revID=0x180, PMCv3, 4k table, 64k table, 16bit ASID [ 1.000000] cpu0: auxID=0x11120, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.000000] cpufreqdt0 at cpu0 [ 1.000000] cpu0: WARNING: power management not supported [ 1.000000] cpus0: set default config for cpu@1 [ 1.000000] cpu1 at cpus0 (/cpus/cpu@1): Arm Cortex-A53 r0p4 (v8-A), id 0x1 [ 1.000000] cpufreqdt1 at cpu1 [ 1.000000] cpu1: WARNING: power management not supported [ 1.000000] cpus0: set default config for cpu@2 [ 1.000000] cpu2 at cpus0 (/cpus/cpu@2): Arm Cortex-A53 r0p4 (v8-A), id 0x2 [ 1.000000] cpufreqdt2 at cpu2 [ 1.000000] cpu2: WARNING: power management not supported [ 1.000000] cpus0: set default config for cpu@3 [ 1.000000] cpu3 at cpus0 (/cpus/cpu@3): Arm Cortex-A53 r0p4 (v8-A), id 0x3 [ 1.000000] cpufreqdt3 at cpu3 [ 1.000000] cpu3: WARNING: power management not supported [ 1.000000] simplebus0: set default config for interrupt-controller@ff811000 [ 1.000000] gic0 at simplebus0 (/interrupt-controller@ff811000): GIC [ 1.000000] armgic0 at gic0: Generic Interrupt Controller, 160 sources (149 valid) [ 1.000000] armgic0: Architecture version 2 (0x43b:32 rev 1) [ 1.000000] armgic0: 16 Priorities, 128 SPIs, 6 PPIs, 15 SGIs [ 1.000000] armgic0: WARNING: power management not supported [ 1.000000] gic0: WARNING: power management not supported [ 1.000000] simplebus0: set default config for syscon@ff100000 [ 1.000000] syscon0 at simplebus0 (/syscon@ff100000): System Controller Registers [ 1.000000] syscon0: WARNING: power management not supported [ 1.000000] simplebus0: set default config for xin24m [ 1.000000] fclock0 at simplebus0 (/xin24m): 24000000 Hz fixed clock (xin24m) [ 1.000000] fclock0: WARNING: power management not supported [ 1.000000] simplebus0: set default config for syscon@ff450000 [ 1.000000] syscon1 at simplebus0 (/syscon@ff450000): System Controller Registers [ 1.000000] syscon1: WARNING: power management not supported [ 1.000000] simplebus0: set default config for external-gmac-clock [ 1.000000] fclock1 at simplebus0 (/external-gmac-clock): 125000000 Hz fixed clock (gmac_clkin) [ 1.000000] fclock1: WARNING: power management not supported [ 1.000000] simplebus0: set default config for timer [ 1.000000] gtmr0 at simplebus0 (/timer): Generic Timer [ 1.000000] gtmr0: interrupting on GIC irq 27 [ 1.000000] armgtmr0 at gtmr0: Generic Timer (24000 kHz, virtual) [ 1.000000] timecounter: Timecounter "armgtmr0" frequency 24000000 Hz quality 500 [ 1.000003] armgtmr0: WARNING: power management not supported [ 1.000003] gtmr0: WARNING: power management not supported [ 1.000003] simplebus0: set default config for clock-controller@ff440000 [ 1.000003] rkcru0 at simplebus0 (/clock-controller@ff440000)clk: assigned clock (0) not found, skipping... [ 1.000003] clk: assigned clock (1) not found, skipping... [ 1.000003] clk: assigned clock (2) not found, skipping... [ 1.000003] clk: assigned clock (8) not found, skipping... [ 1.000003] clk: assigned clock (9) not found, skipping... [ 1.000003] clk: assigned clock (10) not found, skipping... [ 1.000003] clk: assigned clock (11) not found, skipping... [ 1.000003] clk: assigned clock (12) not found, skipping... [ 1.000003] clk: assigned clock (13) not found, skipping... [ 1.000003] clk: assigned clock (14) not found, skipping... [ 1.000003] clk: assigned clock (15) not found, skipping... [ 1.000003] clk: assigned clock (16) not found, skipping... [ 1.000003] clk: assigned clock (17) not found, skipping... [ 1.000003] clk: assigned clock (19) not found, skipping... [ 1.000003] clk: assigned clock (20) not found, skipping... [ 1.000003] clk: assigned clock (30) not found, skipping... [ 1.000003] : RK3328 CRU [ 1.000003] rkcru0: 1 apll <- xin24m pll 400000000 Hz [ 1.000003] rkcru0: 2 dpll <- xin24m pll 664000000 Hz [ 1.000003] rkcru0: 3 cpll <- xin24m pll 1200000000 Hz [ 1.000003] rkcru0: 4 gpll <- xin24m pll 491500127 Hz [ 1.000003] rkcru0: 5 npll <- xin24m pll 600000000 Hz [ 1.000003] rkcru0: 6 armclk <- npll arm 600000000 Hz [ 1.000003] rkcru0: 136 aclk_bus_pre <- cpll comp 150000000 Hz [ 1.000003] rkcru0: 328 hclk_bus_pre <- aclk_bus_pre comp 75000000 Hz [ 1.000003] rkcru0: 216 pclk_bus_pre <- aclk_bus_pre comp 75000000 Hz [ 1.000003] rkcru0: 137 aclk_peri_pre <- cpll comp 150000000 Hz [ 1.000003] rkcru0: 230 pclk_peri <- aclk_peri_pre comp 75000000 Hz [ 1.000003] rkcru0: 308 hclk_peri <- aclk_peri_pre comp 75000000 Hz [ 1.000003] rkcru0: 33 clk_sdmmc <- gpll comp 81916687 Hz [ 1.000003] rkcru0: 34 clk_sdio <- cpll comp 100000000 Hz [ 1.000003] rkcru0: 35 clk_emmc <- gpll comp 81916687 Hz [ 1.000003] rkcru0: 0 clk_uart0_div <- cpll comp 150000000 Hz [ 1.000003] rkcru0: 0 clk_uart1_div <- cpll comp 150000000 Hz [ 1.000003] rkcru0: 0 clk_uart2_div <- cpll comp 150000000 Hz [ 1.000003] rkcru0: 146 aclk_gmac <- cpll comp 150000000 Hz [ 1.000003] rkcru0: 220 pclk_gmac <- aclk_gmac comp 50000000 Hz [ 1.000003] rkcru0: 99 clk_mac2io_src <- cpll comp 200000000 Hz [ 1.000003] rkcru0: 91 clk_mac2io_out <- cpll comp 150000000 Hz [ 1.000003] rkcru0: 55 clk_i2c0 <- cpll comp 150000000 Hz [ 1.000003] rkcru0: 56 clk_i2c1 <- cpll comp 150000000 Hz [ 1.000003] rkcru0: 57 clk_i2c2 <- cpll comp 150000000 Hz [ 1.000003] rkcru0: 58 clk_i2c3 <- cpll comp 150000000 Hz [ 1.000003] rkcru0: 36 clk_tsadc <- clk_24m comp 49896 Hz [ 1.000003] rkcru0: 0 clk_24m <- xin24m comp 24000000 Hz [ 1.000003] rkcru0: 0 apll_core <- apll gate 400000000 Hz [ 1.000003] rkcru0: 0 dpll_core <- dpll gate 664000000 Hz [ 1.000003] rkcru0: 0 gpll_core <- gpll gate 491500127 Hz [ 1.000003] rkcru0: 0 npll_core <- npll gate 600000000 Hz [ 1.000003] rkcru0: 0 gpll_peri <- gpll gate 491500127 Hz [ 1.000003] rkcru0: 0 cpll_peri <- cpll gate 1200000000 Hz [ 1.000003] rkcru0: 0 hdmiphy_peri <- hdmiphy gate 24000000 Hz [ 1.000003] rkcru0: 0 pclk_bus <- pclk_bus_pre gate 75000000 Hz [ 1.000003] rkcru0: 0 pclk_phy_pre <- pclk_bus_pre gate 75000000 Hz [ 1.000003] rkcru0: 153 aclk_peri <- aclk_peri_pre gate 150000000 Hz [ 1.000003] rkcru0: 205 pclk_i2c0 <- pclk_bus gate 75000000 Hz [ 1.000003] rkcru0: 206 pclk_i2c1 <- pclk_bus gate 75000000 Hz [ 1.000003] rkcru0: 207 pclk_i2c2 <- pclk_bus gate 75000000 Hz [ 1.000003] rkcru0: 208 pclk_i2c3 <- pclk_bus gate 75000000 Hz [ 1.000003] rkcru0: 200 pclk_gpio0 <- pclk_bus gate 75000000 Hz [ 1.000003] rkcru0: 201 pclk_gpio1 <- pclk_bus gate 75000000 Hz [ 1.000003] rkcru0: 202 pclk_gpio2 <- pclk_bus gate 75000000 Hz [ 1.000003] rkcru0: 203 pclk_gpio3 <- pclk_bus gate 75000000 Hz [ 1.000003] rkcru0: 210 pclk_uart0 <- pclk_bus gate 75000000 Hz [ 1.000003] rkcru0: 211 pclk_uart1 <- pclk_bus gate 75000000 Hz [ 1.000003] rkcru0: 212 pclk_uart2 <- pclk_bus gate 75000000 Hz [ 1.000003] rkcru0: 213 pclk_tsadc <- pclk_bus gate 75000000 Hz [ 1.000003] rkcru0: 90 clk_mac2io_ref <- clk_mac2io gate 125000000 Hz [ 1.000003] rkcru0: 87 clk_mac2io_rx <- clk_mac2io gate 125000000 Hz [ 1.000003] rkcru0: 88 clk_mac2io_tx <- clk_mac2io gate 125000000 Hz [ 1.000003] rkcru0: 89 clk_mac2io_refout <- clk_mac2io gate 125000000 Hz [ 1.000003] rkcru0: 0 pclk_phy_niu <- pclk_phy_pre gate 75000000 Hz [ 1.000003] rkcru0: 132 aclk_usb3otg <- aclk_peri gate 150000000 Hz [ 1.000003] rkcru0: 317 hclk_sdmmc <- hclk_peri gate 75000000 Hz [ 1.000003] rkcru0: 318 hclk_sdio <- hclk_peri gate 75000000 Hz [ 1.000003] rkcru0: 319 hclk_emmc <- hclk_peri gate 75000000 Hz [ 1.000003] rkcru0: 320 hclk_sdmmc_ext <- hclk_peri gate 75000000 Hz [ 1.000003] rkcru0: 334 hclk_host0 <- hclk_peri gate 75000000 Hz [ 1.000003] rkcru0: 335 hclk_host0_arb <- hclk_peri gate 75000000 Hz [ 1.000003] rkcru0: 333 hclk_otg <- hclk_peri gate 75000000 Hz [ 1.000003] rkcru0: 332 hclk_otg_pmu <- hclk_peri gate 75000000 Hz [ 1.000003] rkcru0: 150 aclk_mac2io <- aclk_gmac gate 150000000 Hz [ 1.000003] rkcru0: 223 pclk_mac2io <- pclk_gmac gate 50000000 Hz [ 1.000003] rkcru0: 0 aclk_gmac_niu <- aclk_gmac gate 150000000 Hz [ 1.000003] rkcru0: 0 pclk_gmac_niu <- pclk_gmac gate 50000000 Hz [ 1.000003] rkcru0: 122 hdmiphy <- xin24m mux 24000000 Hz [ 1.000003] rkcru0: 123 usb480m <- xin24m mux 24000000 Hz [ 1.000003] rkcru0: 38 sclk_uart0 <- xin24m mux 24000000 Hz [ 1.000003] rkcru0: 39 sclk_uart1 <- xin24m mux 24000000 Hz [ 1.000003] rkcru0: 40 sclk_uart2 <- xin24m mux 24000000 Hz [ 1.000003] rkcru0: 100 clk_mac2io <- gmac_clkin mux 125000000 Hz [ 1.000003] rkcru0: 102 clk_mac2io_ext <- clk_mac2io mux 125000000 Hz [ 1.000003] rkcru0: 0 clk_i2s0_div <- cpll comp 75000000 Hz [ 1.000003] rkcru0: 0 clk_i2s1_div <- cpll comp 75000000 Hz [ 1.000003] rkcru0: 0 clk_i2s2_div <- cpll comp 75000000 Hz [ 1.000003] rkcru0: 0 clk_spdif_div <- cpll comp 75000000 Hz [ 1.000003] rkcru0: 0 clk_i2s0_frac <- clk_i2s0_div comp 3750000 Hz [ 1.000003] rkcru0: 0 clk_i2s1_frac <- clk_i2s1_div comp 3750000 Hz [ 1.000003] rkcru0: 0 clk_i2s2_frac <- clk_i2s2_div comp 3750000 Hz [ 1.000003] rkcru0: 0 clk_spdif_frac <- clk_spdif_div comp 3750000 Hz [ 1.000003] rkcru0: 0 clk_i2s0_mux <- clk_i2s0_div mux 75000000 Hz [ 1.000003] rkcru0: 0 clk_i2s1_mux <- clk_i2s1_div mux 75000000 Hz [ 1.000003] rkcru0: 0 clk_i2s2_mux <- clk_i2s2_div mux 75000000 Hz [ 1.000003] rkcru0: 0 clk_spdif_mux <- clk_spdif_div mux 75000000 Hz [ 1.000003] rkcru0: 41 clk_i2s0 <- clk_i2s0_mux gate 75000000 Hz [ 1.000003] rkcru0: 42 clk_i2s1 <- clk_i2s1_mux gate 75000000 Hz [ 1.000003] rkcru0: 43 clk_i2s2 <- clk_i2s2_mux gate 75000000 Hz [ 1.000003] rkcru0: 46 clk_spdif <- clk_spdif_mux gate 75000000 Hz [ 1.000003] rkcru0: 311 hclk_i2s0 <- hclk_bus_pre gate 75000000 Hz [ 1.000003] rkcru0: 313 hclk_i2s1 <- hclk_bus_pre gate 75000000 Hz [ 1.000003] rkcru0: 313 hclk_i2s2 <- hclk_bus_pre gate 75000000 Hz [ 1.000003] rkcru0: 314 hclk_spdif <- hclk_bus_pre gate 75000000 Hz [ 1.000003] rkcru0: 44 i2s1_out <- clk_i2s1 comp 75000000 Hz [ 1.000003] rkcru0: 45 i2s2_out <- clk_i2s2 comp 75000000 Hz [ 1.000003] rkcru0: WARNING: power management not supported [ 1.000003] simplebus0: set default config for pinctrl [ 1.000003] rkiomux0 at simplebus0 (/pinctrl): RK3328 IOMUX control [ 1.000003] rkgpio0 at rkiomux0: GPIO (gpio0@ff210000) [ 1.000003] gpio0 at rkgpio0: 32 pins [ 1.000003] rkgpio0: WARNING: power management not supported [ 1.000003] rkgpio1 at rkiomux0: GPIO (gpio1@ff220000) [ 1.000003] gpio1 at rkgpio1: 32 pins [ 1.000003] rkgpio1: WARNING: power management not supported [ 1.000003] rkgpio2 at rkiomux0: GPIO (gpio2@ff230000) [ 1.000003] gpio2 at rkgpio2: 32 pins [ 1.000003] rkgpio2: WARNING: power management not supported [ 1.000003] rkgpio3 at rkiomux0: GPIO (gpio3@ff240000) [ 1.000003] gpio3 at rkgpio3: 32 pins [ 1.000003] rkgpio3: WARNING: power management not supported [ 1.000003] rkiomux0: WARNING: power management not supported [ 1.000003] simplebus0: set default config for i2c@ff160000 [ 1.000003] rkiic0 at simplebus0 (/i2c@ff160000): Rockchip I2C (100000 Hz) [ 1.000003] iic0 at rkiic0: I2C bus [ 1.000003] rkpmic0 at iic0 addr 0x18: RK805 Power Management and Real Time Clock IC [ 1.000003] rkpmic0: Chip ID 0x8050 [ 1.000003] rkreg0 at rkpmic0: vdd_logic [ 1.000003] rkreg0: WARNING: power management not supported [ 1.000003] rkreg1 at rkpmic0: vdd_arm [ 1.000003] rkreg1: WARNING: power management not supported [ 1.000003] rkreg2 at rkpmic0: vcc_ddr [ 1.000003] rkreg2: WARNING: power management not supported [ 1.000003] rkreg3 at rkpmic0: vcc_io [ 1.000003] rkreg3: WARNING: power management not supported [ 1.000003] rkreg4 at rkpmic0: vcc_18 [ 1.000003] rkreg4: WARNING: power management not supported [ 1.000003] rkreg5 at rkpmic0: vcc18_emmc [ 1.000003] rkreg5: WARNING: power management not supported [ 1.000003] rkreg6 at rkpmic0: vdd_10 [ 1.000003] rkreg6: WARNING: power management not supported [ 1.000003] rkpmic0: WARNING: power management not supported [ 1.000003] rkiic0: WARNING: power management not supported [ 1.000003] simplebus0: set default config for vcc-sys [ 1.000003] fregulator0 at simplebus0 (/vcc-sys): vcc_sys [ 1.000003] fregulator0: WARNING: power management not supported [ 1.000003] simplebus0: set default config for sdmmc-regulator [ 1.000003] fregulator1 at simplebus0 (/sdmmc-regulator): vcc_sd [ 1.000003] fregulator1: WARNING: power management not supported [ 1.000003] simplebus0: set default config for serial@ff130000 [ 1.000003] com0 at simplebus0 (/serial@ff130000): DesignWare APB UART, 64-byte FIFO [ 1.000003] com0: console [ 1.000003] com0: interrupting on GIC irq 89 [ 1.000003] com0: WARNING: power management not supported [ 1.000003] simplebus0: set default config for vcc-host-5v-regulator [ 1.000003] fregulator2 at simplebus0 (/vcc-host-5v-regulator): vcc_host_5v [ 1.000003] fregulator2: WARNING: power management not supported [ 1.000003] simplebus0: set default config for vcc-host1-5v-regulator [ 1.000003] fregulator3 at simplebus0 (/vcc-host1-5v-regulator): vcc_host1_5v [ 1.000003] fregulator3: WARNING: power management not supported [ 1.000003] simplebus0: set default config for display-subsystem [ 1.000003] rkdrm0 at simplebus0 (/display-subsystem) [ 1.000003] rkdrm0: WARNING: power management not supported [ 1.000003] syscon1: set default config for usb2-phy@100 [ 1.000003] rkusb0 at syscon1 (/syscon@ff450000/usb2-phy@100): USB2 PHY [ 1.000003] rkusbphy0 at rkusb0: USB2 OTG port [ 1.000003] rkusbphy0: WARNING: power management not supported [ 1.000003] rkusbphy1 at rkusb0: USB2 host port [ 1.000003] rkusbphy1: WARNING: power management not supported [ 1.000003] rkusb0: WARNING: power management not supported [ 1.000003] simplebus0: set default config for opp_table0 [ 1.000003] /opp_table0 at simplebus0 not configured [ 1.000003] simplebus0: set default config for i2s@ff010000 [ 1.000003] rki2s0 at simplebus0 (/i2s@ff010000)autoconfiguration error: : couldn't enable i2s_hclk clock: 2 [ 1.000003] rki2s0: WARNING: power management not supported [ 1.000003] simplebus0: set default config for codec@ff410000 [ 1.000003] /codec@ff410000 at simplebus0 not configured [ 1.000003] simplebus0: set default config for vop@ff370000 [ 1.000003] /vop@ff370000 at simplebus0 not configured [ 1.000003] simplebus0: set default config for hdmi@ff3c0000 [ 1.000003] /hdmi@ff3c0000 at simplebus0 not configured [ 1.000003] simplebus1: set default config for dmac@ff1f0000 [ 1.000003] /amba/dmac@ff1f0000 at simplebus1 not configured [ 1.000003] simplebus0: set default config for spdif-dit [ 1.000003] spdiftx0 at simplebus0 (/spdif-dit): SPDIF transmitter [ 1.000003] spdiftx0: WARNING: power management not supported [ 1.000003] simplebus0: set init config for tsadc@ff250000 [ 1.000003] rktsadc0 at simplebus0 (/tsadc@ff250000): RK3328/3399 Temperature Sensor ADC [ 1.000003] rktsadc0: interrupting on GIC irq 90 [ 1.000003] simplebus0: set default config for tsadc@ff250000 [ 1.000003] simplebus0: set default config for thermal-zones [ 1.000003] simplebus0: set default config for iommu@ff350800 [ 1.000003] /iommu@ff350800 at simplebus0 not configured [ 1.000003] syscon0: set default config for power-controller [ 1.000003] /syscon@ff100000/power-controller at syscon0 not configured [ 1.000003] simplebus0: set default config for iommu@ff373f00 [ 1.000003] /iommu@ff373f00 at simplebus0 not configured [ 1.000003] simplebus0: set default config for phy@ff430000 [ 1.000003] /phy@ff430000 at simplebus0 not configured [ 1.000003] simplebus0: set default config for efuse@ff260000 [ 1.000003] /efuse@ff260000 at simplebus0 not configured [ 1.000003] simplebus0: set default config for spdif@ff030000 [ 1.000003] /spdif@ff030000 at simplebus0 not configured [ 1.000003] syscon0: set default config for io-domains [ 1.000003] /syscon@ff100000/io-domains at syscon0 not configured [ 1.000003] syscon0: set default config for grf-gpio [ 1.000003] /syscon@ff100000/grf-gpio at syscon0 not configured [ 1.000003] simplebus0: set default config for spi@ff190000 [ 1.000003] /spi@ff190000 at simplebus0 not configured [ 1.000003] simplebus0: set default config for watchdog@ff1a0000 [ 1.000003] dwcwdt0 at simplebus0 (/watchdog@ff1a0000)autoconfiguration error: : couldn't enable clock [ 1.000003] dwcwdt0: WARNING: power management not supported [ 1.000003] simplebus0: set default config for gpu@ff300000 [ 1.000003] /gpu@ff300000 at simplebus0 not configured [ 1.000003] simplebus0: set default config for video-codec@ff350000 [ 1.000003] /video-codec@ff350000 at simplebus0 not configured [ 1.000003] simplebus0: set default config for dwmmc@ff500000 [ 1.000003] dwcmmc0 at simplebus0 (/dwmmc@ff500000): DesignWare SD/MMC [ 1.000003] dwcmmc0: interrupting on GIC irq 44 [ 1.000003] simplebus0: set default config for dwmmc@ff520000 [ 1.000003] dwcmmc1 at simplebus0 (/dwmmc@ff520000): DesignWare SD/MMC [ 1.000003] dwcmmc1: interrupting on GIC irq 46 [ 1.000003] simplebus0: set default config for ethernet@ff540000 [ 1.000003] awge0 at simplebus0 (/ethernet@ff540000): GMAC [ 1.000003] awge0: Core version: 00001035 [ 1.000003] awge0: Ethernet address 3e:6a:aa:ba:f7:fb [ 1.000003] awge0: HW feature mask: d0f17 [ 1.000003] rgephy0 at awge0 phy 0: RTL8211F 1000BASE-T media interface [ 1.000003] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto [ 1.000003] rgephy1 at awge0 phy 1: RTL8211F 1000BASE-T media interface [ 1.000003] rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto [ 1.000003] awge0: interrupting on GIC irq 56 [ 1.000003] awge0: WARNING: power management not supported [ 1.000003] simplebus0: set default config for usb@ff580000 [ 1.000003] dwctwo0 at simplebus0 (/usb@ff580000): DesignWare USB2 OTG [ 1.000003] dwctwo0: interrupting on GIC irq 55 [ 1.000003] simplebus0: set default config for usb@ff5c0000 [ 1.000003] ehci0 at simplebus0 (/usb@ff5c0000): EHCI [ 1.000003] ehci0: interrupting on GIC irq 48 [ 1.000003] ehci0: EHCI version 1.0 [ 1.000003] ehci0: 1 companion controller, 1 port [ 1.000003] usb0 at ehci0: USB revision 2.0 [ 1.000003] simplebus0: set default config for usb@ff5d0000 [ 1.000003] ohci0 at simplebus0 (/usb@ff5d0000): OHCI [ 1.000003] ohci0: interrupting on GIC irq 49 [ 1.000003] ohci0: OHCI version 1.0 [ 1.000003] usb1 at ohci0: USB revision 1.0 [ 1.000003] simplebus0: set default config for usb@ff600000 [ 1.000003] xhci0 at simplebus0 (/usb@ff600000): DesignWare USB3 XHCI (rev. 3.00a) [ 1.000003] xhci0: interrupting on GIC irq 99 [ 1.000003] xhci0: xHCI version 1.10 [ 1.000003] xhci0: hcs1=2000140 hcs2=c0000f1 hcs3=7ff000a [ 1.000003] xhci0: hcc=0x220fe64 [ 1.000003] xhci0: xECP 880 [ 1.000003] xhci0: hcc2=0x2f [ 1.000003] xhci0: ECR: 0x00000401 [ 1.000003] xhci0: ECR: 0x02000402 [ 1.000003] xhci0: SP: 0x02000402 0x20425355 0x00180101 0x00000000 [ 1.000003] xhci0: hs ports 1 - 1 [ 1.000003] xhci0: ECR: 0x03000402 [ 1.000003] xhci0: SP: 0x03000402 0x20425355 0x00000102 0x00000000 [ 1.000003] xhci0: ss ports 2 - 2 [ 1.000003] xhci0: ECR: 0x000f000a [ 1.000003] xhci0: PAGESIZE 0x00000001 [ 1.000003] xhci0: sc_pgsz 0x00001000 [ 1.000003] xhci0: sc_maxslots 0x00000040 [ 1.000003] xhci0: sc_maxports 2 [ 1.000003] xhci0: sc_maxspbuf 1 [ 1.000003] xhci0: eventst: 0x0000000002082f80 0xffffc00031573f80 2000 [ 1.000003] xhci0: dcbaa: 0x0000000002083000 0xffffc00031574000 2000 [ 1.000003] xhci0: current IMOD 0 [ 1.000003] xhci0: USBCMD 0x00000005 [ 1.000003] usb2 at xhci0: USB revision 3.0 [ 1.000003] usb3 at xhci0: USB revision 2.0 [ 1.000003] xhci0: WARNING: power management not supported [ 1.000003] simplebus0: set default config for memory [ 1.000003] simplebus0: set default config for aliases [ 1.000003] simplebus0: set default config for arm-pmu [ 1.000003] armpmu0 at simplebus0 (/arm-pmu): Performance Monitor Unit [ 1.000003] simplebus0: set default config for ir-receiver [ 1.000003] /ir-receiver at simplebus0 not configured [ 1.000003] simplebus0: set default config for leds [ 1.000003] gpioleds0 at simplebus0 (/leds): [ 1.000003] gpioleds0: WARNING: power management not supported [ 1.000003] simplebus0: set default config for sound [ 1.000003] /sound at simplebus0 not configured [ 1.000003] simplebus0: set default config for __symbols__ [ 1.000003] syscon0: set default config for reboot-mode [ 1.000003] /syscon@ff100000/reboot-mode at syscon0 not configured [ 1.000003] simplebus0: WARNING: power management not supported [ 1.000003] DRM debug in drm_minor_register: [ 1.000003] DRM debug in drm_minor_register: new minor registered 64 [ 1.000003] DRM debug in drm_minor_register: [ 1.000003] DRM debug in drm_minor_register: [ 1.000003] DRM debug in drm_minor_register: new minor registered 0 [ 1.000003] rkdrm0: autoconfiguration error: no display interface ports configured [ 1.000003] rkdrm0: autoconfiguration error: couldn't register DRM device: -6 [ 1.000003] armfdt0: WARNING: power management not supported [ 1.000003] entropy: WARNING: extracting entropy too early [ 1.000003] cpu0 has 1 core siblings: cpu0 [ 1.000003] cpu0 has 4 pkg siblings: cpu1 cpu2 cpu3 cpu0 [ 1.000003] cpu0 has 1 1st siblings: cpu0 [ 1.000003] cpu0 first in package: cpu0 [ 1.000003] cpu1 has 1 core siblings: cpu1 [ 1.000003] cpu1 has 4 pkg siblings: cpu2 cpu3 cpu0 cpu1 [ 1.000003] cpu1 has 1 1st siblings: cpu0 [ 1.000003] cpu1 first in package: cpu0 [ 1.000003] cpu2 has 1 core siblings: cpu2 [ 1.000003] cpu2 has 4 pkg siblings: cpu3 cpu0 cpu1 cpu2 [ 1.000003] cpu2 has 1 1st siblings: cpu0 [ 1.000003] cpu2 first in package: cpu0 [ 1.000003] cpu3 has 1 core siblings: cpu3 [ 1.000003] cpu3 has 4 pkg siblings: cpu0 cpu1 cpu2 cpu3 [ 1.000003] cpu3 has 1 1st siblings: cpu0 [ 1.000003] cpu3 first in package: cpu0 [ 1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.000003] UVM: using package allocation scheme, 1 package(s) per bucket [ 1.000003] cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.000003] cpu3: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.000003] cpu3: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 [ 1.000003] cpu3: L1 32KB/64B*256L*2W VIPT Instruction cache [ 1.000003] cpu3: L1 32KB/64B*128L*4W PIPT Data cache [ 1.000003] cpu3: L2 256KB/64B*256L*16W PIPT Unified cache [ 1.000003] cpu3: midr=0x410fd034 mpidr=0x80000003 [ 1.000003] cpu3: revID=0x180, PMCv3, 4k table, 64k table, 16bit ASID [ 1.000003] cpu3: auxID=0x11120, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.000003] cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.000003] cpu2: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.000003] cpu2: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 [ 1.000003] cpu2: L1 32KB/64B*256L*2W VIPT Instruction cache [ 1.000003] cpu2: L1 32KB/64B*128L*4W PIPT Data cache [ 1.000003] cpu2: L2 256KB/64B*256L*16W PIPT Unified cache [ 1.000003] cpu2: midr=0x410fd034 mpidr=0x80000002 [ 1.000003] cpu2: revID=0x180, PMCv3, 4k table, 64k table, 16bit ASID [ 1.000003] cpu2: auxID=0x11120, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.000003] cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.000003] cpu1: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.000003] cpu1: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 [ 1.000003] cpu1: L1 32KB/64B*256L*2W VIPT Instruction cache [ 1.000003] cpu1: L1 32KB/64B*128L*4W PIPT Data cache [ 1.000003] cpu1: L2 256KB/64B*256L*16W PIPT Unified cache [ 1.000003] cpu1: midr=0x410fd034 mpidr=0x80000001 [ 1.000003] cpu1: revID=0x180, PMCv3, 4k table, 64k table, 16bit ASID [ 1.000003] cpu1: auxID=0x11120, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.333130] cpufreqdt0: supported rate: 1296.000 MHz, 1300000 uV [ 1.333130] cpufreqdt0: supported rate: 1200.000 MHz, 1225000 uV [ 1.333130] cpufreqdt0: supported rate: 1008.000 MHz, 1100000 uV [ 1.333130] cpufreqdt0: supported rate: 816.000 MHz, 1000000 uV [ 1.333130] cpufreqdt0: supported rate: 600.000 MHz, 950000 uV [ 1.333130] cpufreqdt0: rate: 1296.000 MHz, 1300000 uV [ 1.333130] cpufreqdt1: WARNING: power management not supported [ 1.333130] cpufreqdt2: WARNING: power management not supported [ 1.333130] cpufreqdt3: WARNING: power management not supported [ 1.333130] sdmmc0 at dwcmmc0 [ 1.343122] dwcmmc0: WARNING: power management not supported [ 1.343122] sdmmc1 at dwcmmc1 [ 1.343122] dwcmmc1: WARNING: power management not supported [ 1.343122] dwcmmc1: set clock rate to 800000 kHz (target 400 kHz) [ 1.343122] uhub0 at usb2: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 [ 1.343122] uhub0: 1 port with 1 removable, self powered [ 1.343122] uhub1 at usb3: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 [ 1.343122] uhub1: 1 port with 1 removable, self powered [ 1.343122] cpufreqdt0: WARNING: power management not supported [ 1.353125] dwcmmc0: set clock rate to 800000 kHz (target 400 kHz) [ 1.353125] armpmu0: interrupting on GIC irq 132 [ 1.353125] armpmu0: interrupting on GIC irq 133 [ 1.353125] armpmu0: interrupting on GIC irq 134 [ 1.353125] armpmu0: interrupting on GIC irq 135 [ 1.363123] armpmu0: WARNING: power management not supported [ 1.363123] uhub2 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.363123] uhub2: 1 port with 1 removable, self powered [ 1.363123] uhub3 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.363123] uhub3: 1 port with 1 removable, self powered [ 1.383124] dwctwo0: Core Release: 3.10a (snpsid=4f54310a) [ 1.383124] usb4 at dwctwo0: USB revision 2.0 [ 1.383124] IPsec: Initialized Security Association Processing. [ 1.383124] aes: ARMv8.0-AES [ 1.383124] chacha: ARM NEON ChaCha [ 1.383124] adiantum: self-test passed [ 1.383124] aes_ccm: self-test passed [ 1.383124] blake2s: self-test passed [ 1.383124] dwctwo0: holding up boot [ 1.383124] usb0: holding up boot [ 1.393350] usb1: holding up boot [ 1.393350] usb2: holding up boot [ 1.393350] usb3: holding up boot [ 1.393350] sdmmc0: holding up boot [ 1.393350] sdmmc1: holding up boot [ 1.393350] uhub0: holding up boot [ 1.393350] uhub1: holding up boot [ 1.393350] uhub2: holding up boot [ 1.393350] uhub3: holding up boot [ 1.403121] uhub4 at usb4: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.403121] uhub4: 1 port with 1 removable, self powered [ 1.453122] dwcmmc1: set clock rate to 50000000 kHz (target 25000 kHz) [ 1.473123] dwcmmc1: set clock rate to 100000000 kHz (target 52000 kHz) [ 1.473123] ld1 at sdmmc1: <0x45:0x0100:DG4032:0x00:0x84568907:0x000> [ 1.473123] ld1: WARNING: power management not supported [ 1.473123] ld1: 29820 MB, 7573 cyl, 128 head, 63 sec, 512 bytes/sect x 61071360 sectors [ 1.483125] ld1: 8-bit width, 4096 KB cache, 52.000 MHz [ 1.483125] dwcmmc0: set clock rate to 50000000 kHz (target 25000 kHz) [ 1.483125] dwcmmc0: set clock rate to 100000000 kHz (target 50000 kHz) [ 1.493125] sdmmc0: SD card status: 4-bit, C10, U3, V30, A2 [ 1.493125] ld0 at sdmmc0: <0x03:0x5344:SN64G:0x80:0xf89112a0:0x13a> [ 1.493125] ld0: WARNING: power management not supported [ 1.493125] ld0: 60906 MB, 7764 cyl, 255 head, 63 sec, 512 bytes/sect x 124735488 sectors [ 1.493125] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz [ 1.613126] dwctwo0: WARNING: power management not supported [ 3.603170] ure0 at uhub2 port 1 [ 3.603170] ure0: Realtek (0x0bda) USB 10/100/1000 LAN (0x8153), rev 2.10/30.00, addr 2 [ 3.603170] ure0: RTL8153 ver 5c30 [ 3.673177] rgephy2 at ure0 phy 0: RTL8251 1000BASE-T media interface, rev. 0 [ 3.683176] rgephy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto [ 3.683176] ure0: Ethernet address 00:e0:4c:00:09:db [ 3.683176] cgd: self-test aes-xts-256 [ 3.683176] cgd: self-test aes-xts-512 [ 3.683176] cgd: self-test aes-cbc-128 [ 3.683176] cgd: self-test aes-cbc-256 [ 3.683176] cgd: self-test 3des-cbc-192 [ 3.683176] cgd: self-test blowfish-cbc-448 [ 3.683176] cgd: self-test aes-cbc-128 (encblkno8) [ 3.683176] cgd: self-tests passed [ 3.683176] Searching for RAID components... [ 3.693176] WARNING: 4 errors while detecting hardware; check system log. [ 3.703179] boot device: ld0 [ 3.703179] root on ld0a dumps on ld0b [ 3.703179] mountroot: trying ffs... [ 3.713179] root file system type: ffs [ 3.713179] kern.module.path=/stand/evbarm/9.99.77/modules [ 3.724547] init: copying out path `/sbin/init' 11 [ 5.013291] entropy: ready [ 5.413310] awge0: link state DOWN (was UNKNOWN) [ 5.413310] ure0: link state DOWN (was UNKNOWN) [ 7.773478] ure0: link state UP (was DOWN)