Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 7.99.2 (ALLWINNER_A80) #202: Sun Dec 7 16:10:49 AST 2014 jmcneill@megatron.local:/Users/jmcneill/branches/HEAD/src/sys/arch/evbarm/compile/obj/ALLWINNER_A80 total memory = 2048 MB avail memory = 2022 MB sysctl_createv: sysctl_create(machine_arch) returned 17 timecounter: Timecounters tick every 10.000 msec mainbus0 (root) cpu0 at mainbus0 core 0: 1008 MHz Cortex-A7 r0p5 (Cortex V7A core) cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled cpu0: isar: [0]=0x2101110 [1]=0x13112111 [2]=0x21232041 [3]=0x11112131, [4]=0x10011142, [5]=0 cpu0: mmfr: [0]=0x10101105 [1]=0x40000000 [2]=0x1240000 [3]=0x2102211 cpu0: pfr: [0]=0x1131 [1]=0x11011 cpu0: 32KB/32B 2-way L1 VIPT Instruction cache cpu0: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache cpu0: 512KB/64B 8-way write-through L2 PIPT Unified cache vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals vfp0: mvfr: [0]=0x10110222 [1]=0x11111111 armperiph0 at mainbus0fixup: cbar 0x1c80000 -> 0x1c40000 armgic0 at armperiph0: Generic Interrupt Controller, 224 sources (215 valid) armgic0: 32 Priorities, 192 SPIs, 7 PPIs, 16 SGIs armgtmr0 at armperiph0: ARMv7 Generic 64-bit Timer (24000 kHz) armgtmr0: interrupting on irq 27 armgtmr0: cp15 CNT_FRQ not set timecounter: Timecounter "armgtmr0" frequency 24000000 Hz quality 500 awinio0 at mainbus0: A80 awingpio0 at awinio0 awindma0 at awinio0: DMA awindma0: interrupting on irq 82 com0 at awinio0 port 0: ns16550a, working fifo com0: console awinwdt0 at awinio0: default period is 10 seconds awinusb0 at awinio0 port 0 ohci0 at awinusb0: OHCI USB controller ohci0: OHCI version 1.0 usb0 at ohci0: USB revision 1.0 ohci0: interrupting on irq 105 ehci0 at awinusb0: EHCI USB controller ehci0: EHCI version 1.0 ehci0: companion controller, 1 port each: ohci0 usb1 at ehci0: USB revision 2.0 ehci0: interrupting on irq 104 awinusb1 at awinio0 port 1 ehci1 at awinusb1: EHCI USB controller ehci1: EHCI version 1.0 ehci1: wrong number of companions (1 != 0) ehci1: ohci or uhci probably not configured usb2 at ehci1: USB revision 2.0 ehci1: interrupting on irq 106 awinusb2 at awinio0 port 2 awinusb2: no power gpio found ohci1 at awinusb2: OHCI USB controller ohci1: OHCI version 1.0 usb3 at ohci1: USB revision 1.0 ohci1: interrupting on irq 109 ehci2 at awinusb2: EHCI USB controller ehci2: EHCI version 1.0 ehci2: companion controller, 1 port each: ohci1 usb4 at ehci2: USB revision 2.0 ehci2: interrupting on irq 108 awinmmc0 at awinio0 port 0: SD3.0 (DMA) awinmmc0: interrupting at irq 92 awinmmc2 at awinio0 port 2: SD3.0 (DMA) awinmmc2: interrupting at irq 94 awiniic0 at awinio0 port 0: Marvell TWSI controller awiniic0: interrupting on irq 38 iic0 at awiniic0: I2C bus awiniic1 at awinio0 port 1: Marvell TWSI controller awiniic1: interrupting on irq 39 iic1 at awiniic1: I2C bus awiniic2 at awinio0 port 2: Marvell TWSI controller awiniic2: interrupting on irq 40 iic2 at awiniic2: I2C bus awinp2wi0 at awinio0: RSB awinp2wi0: interrupting on irq 71 iic4 at awinp2wi0: I2C bus axp806pm0 at iic4 addr 0x745 axp806pm0: DCDCA: [0.900V] [ON] axp806pm0: DCDCB: [1.350V] [OFF] axp806pm0: DCDCC: [0.900V] [OFF] axp806pm0: DCDCD: [0.900V] [ON] axp806pm0: DCDCE: [2.100V] [ON] axp806pm0: ALDO1: [3.000V] [ON] axp806pm0: ALDO2: [0.700V] [OFF] axp806pm0: ALDO3: [0.700V] [OFF] axp806pm0: BLDO1: [1.800V] [ON] axp806pm0: BLDO2: [1.800V] [ON] axp806pm0: BLDO3: [0.700V] [OFF] axp806pm0: BLDO4: [0.700V] [OFF] axp806pm0: CLDO1: [3.000V] [OFF] axp806pm0: CLDO2: [0.700V] [OFF] axp806pm0: CLDO3: [0.700V] [OFF] axp809pm0 at iic4 addr 0x3a3 axp809pm0: GPIO1: [2.500V] [ON] ac100ic0 at iic4 addr 0xe89: CODEC/RTC awge0 at awinio0: Gigabit Ethernet Controller axp806pm0: CLDO1: [3.000V] [OFF] axp806pm0: CLDO1: [3.000V] [ON] axp809pm0: GPIO1: [2.500V] [ON] awge0: interrupting on irq 114 awge0: Ethernet address: f2:00:ad:c9:16:e0 rgephy0 at awge0 phy 0: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 5 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto rgephy1 at awge0 phy 1: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 5 rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto awinir0 at awinio0: IR awinir0: interrupting on irq 69 cir0 at awinir0 gpio0 at awingpio0: 2 pins gpio1 at awingpio0: 20 pins gpio2 at awingpio0: 9 pins gpio3 at awingpio0: 28 pins gpio4 at awingpio0: 21 pins gpio5 at awingpio0: 16 pins gpio6 at awingpio0: 14 pins gpio7 at awingpio0: 13 pins gpio8 at awingpio0: 16 pins gpio9 at awingpio0: 2 pins timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 sdmmc0 at awinmmc0 sdmmc2 at awinmmc2 uhub0 at usb0: Allwinner OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 1 port with 1 removable, self powered uhub1 at usb1: Allwinner EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 1 port with 1 removable, self powered uhub2 at usb2: Allwinner EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 1 port with 1 removable, self powered uhub3 at usb3: Allwinner OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 1 port with 1 removable, self powered uhub4 at usb4: Allwinner EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 1 port with 1 removable, self powered ld0 at sdmmc0: <0x1b:0x534d:00000:0x10:0xac8c2ed7:0x0ea> ld0: 30528 MB, 7753 cyl, 128 head, 63 sec, 512 bytes/sect x 62521344 sectors ld2 at sdmmc2: <0x15:0x0100:8WMB3R:0x00:0x0857bce3:0x000> ld2: 7456 MB, 3787 cyl, 64 head, 63 sec, 512 bytes/sect x 15269888 sectors ld0: 4-bit width, bus clock 48.000 MHz ld2: mbr partition exceeds disk size ld2: 8-bit width, bus clock 48.000 MHz ehci2: handing over low speed device on port 1 to ohci1 uhub5 at uhub1 port 1: vendor 05e3 USB2.0 Hub, class 9/0, rev 2.00/85.36, addr 2 uhub5: single transaction translator uhub5: 4 ports with 4 removable, self powered uhidev0 at uhub3 port 1 configuration 1 interface 0 uhidev0: BTC HP USB Multimedia Keyboard, rev 1.10/1.20, addr 2, iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes uhidev1 at uhub5 port 3 configuration 1 interface 0 uhidev1: Logitech USB Receiver, rev 2.00/30.00, addr 3, iclass 3/1 ums0 at uhidev1: 16 buttons, W and Z dirs wsmouse0 at ums0 mux 0 uhidev2 at uhub5 port 3 configuration 1 interface 1 uhidev2: Logitech USB Receiver, rev 2.00/30.00, addr 3, iclass 3/0 uhidev2: 17 report ids uhid0 at uhidev2 reportid 3: input=4, output=0, feature=0 uhid1 at uhidev2 reportid 16: input=6, output=6, feature=0 uhid2 at uhidev2 reportid 17: input=19, output=19, feature=0 boot device: unknown device major 0xffffffffffffffff root device: ld0a dump device (default ld0b): file system (default generic): root on ld0a dumps on ld0b root file system type: ffs kern.module.path=/stand/evbarm/7.99.2/modules TODR-GET-YMDHMS: rv = 0 TODR-GET-YMDHMS: rtc_offset = 0 TODR-GET-YMDHMS: 2014/12/07 22:54:05, (wday 0) (epoch 1417992845.000000) init path (default /sbin/init): init: trying /sbin/init wskbd0 at ukbd0 mux 1 uhidev3 at uhub3 port 1 configuration 1 interface 1 uhidev3: BTC HP USB Multimedia Keyboard, rev 1.10/1.20, addr 2, iclass 3/0 uhidev3: 3 report ids uhid3 at uhidev3 reportid 1: input=1, output=0, feature=0 uhid4 at uhidev3 reportid 2: input=3, output=0, feature=0 uhid5 at uhidev3 reportid 3: input=3, output=0, feature=4