LAN, 21, rbootserver 1Z SYS_UBOOT BOOTING A SYSTEM >> NetBSD/hp300 Primary Boot, Revision 1.9 >> (scottr@polka, Fri Mar 13 18:11:29 CST 1998) >> HP 9000/340 SPU >> Enter "reset" to reset system. Boot: [[[le0a:]netbsd][-s][-a][-d]] :- boot: client IP address: 192.168.1.10 boot: client name: client root addr=192.168.1.5 path=/export/client/root [spinning cursor] Copyright (c) 1996, 1997 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 1.3.1 (GENERIC) #0: Tue May 5 18:32:15 EDT 1998 mw@xarph:/mnt/fatmac/usr/src/sys/arch/hp300/compile/GENERIC HP 9000/400 (50MHz MC68030 CPU+MMU, 50MHz MC68882 FPU, 32K physical-address cache) cpu: delay divisor 40, mmuid 7 real mem = 33542144 avail mem = 26832896 using 818 buffers containing 3350528 bytes of memory Parity detection enabled hil1: US ASCII keyboard mainbus0 (root) intio0 at mainbus0 frodo0 at intio0 addr 0x81c000 dnkbd at frodo0 offset 0x0 not configured apci at frodo0 offset 0x20 not configured apci0 at frodo0 offset 0x40: no fifo apci1 at frodo0 offset 0x60: no fifo dio0 at mainbus0: 98620C, 2 channels, 32 bit DMA dca1 at dio0 scode 7 ipl 3: no fifo dca0 at dio0 scode 9 ipl 5: working fifo internal parallel at dio0 scode 12 not configured oscsi0 at dio0 scode 14 ipl 4: 32 bit dma, async, scsi id 7 sd0 at oscsi0 targ 1 lun 0: (SCSI-2) sd0: 2737 cylinders, 21 heads, 5688447 blocks, 512 bytes/block sd1 at oscsi0 targ 5 lun 0: sd1: 1216 cylinders, 9 heads, 410211 blocks, 512 bytes/block sd2 at oscsi0 targ 6 lun 0: sd2: 1216 cylinders, 9 heads, 410211 blocks, 512 bytes/block le0 at dio0 scode 21 ipl 5: address cc:cc:cc:cc:cc:cc le0: 8 receive buffers, 2 transmit buffers dcm0 at dio0 scode 28 ipl 3 dcm1 at dio0 scode 29 ipl 3 topcat0 at dio0 scode 133: 1280 x 1024 256 color hi-res catseye display grf0 at topcat0 ite0 at grf0: console interrupt levels: bio = 4, net = 5, tty = 5 boot device: le0 nfs_boot: trying RARP (and RPC/bootparam) nfs_boot: client_addr=0xc0a8010a nfs_boot: server_addr=0xc0a8015 nfs_boot: hostname=client root on nfsserver:/export/client/root root file system type: nfs /etc/rc.conf is not configured. Multiuser boot aborted. Enter pathname of shell or RETURN for sh: